Changes between Version 2 and Version 3 of Downloads/Processing/tuiview


Ignore:
Timestamp:
Jun 5, 2015 1:11:09 PM (4 years ago)
Author:
dac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Downloads/Processing/tuiview

    v2 v3  
    1 [[Image()]]= TuiView =
     1= TuiView =
    22
    3 TuiView is an open source data viewer. It is used as a general image viewer for hyperspectral data and DEMs and as part of the procedure for determining SCT values.
     3[http://tuiview.org/ TuiView]is an open source data viewer similar to ENVI / ERDAS Imagine, the development was funded Landcare Research NZ Ltd. It is build on top of GDAL and is capable of opening any data formats GDAL can read, including BIL, BSQ and GeoTiff. Within ARSF it is used as a general image viewer for hyperspectral data and DEMs and as part of the procedure for determining SCT values.
    44
    5 ARSF have added a number of features to TuiView for better handling of hyperspectral data.
    6 
    7 == General Display of Hyperspectral Files ==
     5ARSF have added a number of features to TuiView for better handling of hyperspectral data. Development of TuiView by ARSF takes place on [https://bitbucket.org/arsf/tuiview Bitbucket].
    86
    97TuiView is opened from the command prompt by typing:
     
    1311}}}
    1412
    15 Add images using the 'Add Raster' button in the top left.
     13Add images using the 'Add Raster' button in the top left. 
    1614
    17 [[Image(tuiview_spectral_profile.png)]]
     15The range of pixel values within an image often does not fall between 0 - 255, as required for display, therefore it is necessary to 'stretch' the values for display. Within TuiView the stretch of the image is adjusted using the 'stretch' dialogue, brought up by through the 'edit -> stretch' menu or right clicking a layer in the list of layers. Within the stretch dialogue the bands displayed and the type of stretch can be selected. A standard deviation stretch which will scale the pixel values to from the image mean - n*standard deviation to the image mean + n*standard deviations. The stretch can be applied to a single image (single arrow) or all open images (multiple arrows) as shown below.
     16
     17[[Image(tuiview_stretch.png, width=500​, align=center)]]
     18
     19It is possible to get pixel values and view spectral profiles of the top image layer using the query tool and selecting 'plot' in the pop up as shown below. Where wavelenghts are stored in the header file these will be used for the x-axis.
     20
     21[[Image(tuiview_spectral_profile.png, width=500, align=center)]]
    1822
    1923
    20 == Display Multiple Files ==
    21