= LIDAR data delivery = Once the data has been processed, it needs to be put into a delivery directory. This is the final file structure in which it will be sent to the customer. == What should be included == 1. ASCII LIDAR point cloud data 1. LAS point cloud data 1. pdf version of flight logsheet 1. readme file describing the data set + copyright notice 1. screenshot of mosaic of all lines (full resolution) and zoomed image with vector overlay 1. data quality report and further processing scripts 1. DEM of the LIDAR data - usually gridded to 2m resolution. 1. Screenshot of DEM For full waveform deliveries the following should also be included: 1. Discrete LAS files 1. Full waveform LAS files 1. Navigation data (.sol file and .trj file) 1. ASCII full waveform extractions - if requested by the PI == Procedure for creating a LIDAR data set delivery == === Semi-scripted method === 1. See the guide at [wiki:Procedures/DeliveryCreation/pythonlibrary delivery library] 1. If you did not create the DEM and screenshots using the above script (-m option) then create them manually using [wiki:Processing/CreateTifs#lidar_intensity.sh lidar_intensity.sh]. [[BR]] You will also need to make a lat long version of the dem (for use with aplcorr) using convert_uk_dem.sh or convert_nonuk_dem.sh appropriately. 1. Generate the readme file. 1. Create a config file for the read me using the generate_readme_config.py script, using the -d option to specify the delivery directory and the -r option to specify the type of config file to generate. 1. Edit the config file and check all the items are filled in: * Any remarks about the data should be entered as a sentence in the "data_quality_remarks" section. * If vectors have been used then the accuracy should be entered in "vectors" (e.g. '5-10' if they're within 5m to 10m) * line_numbering should contain a space separated list of line names linking the logsheet to the processed files. * las_files should contain the path to the processed LAS file in order to extract the per flightline statistics * elevation_difference should contain a list of the elevation differences between overlapping flightlines. Enter the lines numbers and the difference in cm followed by a semicolon e.g 001 002 5; 002 003 4.5; etc... * All "compulsory" items should contain data 1. Create a TeX file. Use the script `create_latex_lidar_readme.py -f ` '''Use the -w option for creating a full waveform readme''' 1. This file can be reviewed and edited in any text editor if needed. Note that this script may cause an error `[Errno 21] Is a directory: '/tmp/'`. If this occurs, fill in the intensity and dem images in the "Optional" section of the config file generated as a result of above steps. 1. Create a PDF file by running `pdflatex ` 1. Review the read me and check carefully to see if it looks OK with all relevant information present 1. Copy it to the delivery directory and remove any temporary files. Recommended to keep the TeX file until after delivery checking in case any edits are required === Manual Method === 1. Copy the template directory over to the project directory. Template directory at `~arsf/arsf_data/2011/delivery/lidar/template` 1. Move the processed data to the delivery directory * Move the LAS binary files into delivery/flightlines/las1.0 * REMEMBER THAT THESE LAS FILES SHOULD HAVE BEEN QC'ED AND CLASSIFIED FOR NOISY POINTS * Rename the files in the convention "LDR-PPPP_PP-yyyydddfnn.LAS" (details in readme). * run las2txt.sh '''Note, it is important to ensure that the correct options are used with this. Otherwise it will output the wrong format.''' * OR run `las2txt --parse txyzicrna ` for each file, outputting to the ascii_laser directory (may not work with LAS 1.1). 1. You need to create a DEM from the lidar data to include with the delivery. Use lidar_aster_dem.sh and put the output file in a directory named 'dem'. Noisy points (those with classification 7) should not be included in the DEM (this is the default behaviour). You should also create a second DEM that is suitable for use in aplcor. Use either convert_uk_dem.sh or convert_nonuk_dem.sh depending on where your project is located, or run the script again specifying the different output projection. This DEM should be name ***_wgs84_latlong.dem 1. Include a pdf version of the flight logsheet with the delivery 1. Make sure correct up to date data quality report (pdf version) is included in docs directory 1. Create full resolution JPGs of mosaic of all the LIDAR lines by intensity, a separate one of the intensity with vectors overlaid (if vectors are available) and one of the dem and put in screenshot directory (with [wiki:Processing/CreateTifs#lidar_intensity.sh lidar_intensity.sh]). 1. Generate the readme using as per point 3 above '''*Note: Be sure that all the files outputted in the above steps conform to the file name formats specified [wiki:Processing/FilenameConventions#Lidardeliveries here]''' A problem that occasionally occurs where there is no hyperspectral data for a particular flight is that a very large dem is created during the DEMGENERATION stage of the delivery script. You should overcome this by using the {{{aplbuffer=False}}} argument for the [[br]] {{{--lidardeminfo}}} option. === Additional Steps for Full Waveform Deliveries === Create the following folders in the delivery directory: - discrete_laser - containing two folders; ascii_files & LAS_files * discrete_laser/ascii_files - move the ascii_laser folder to discrete_laser/ascii_files * discrete_laser/LAS_files - move the discrete LAS files to here - naming convention LDR-PPPP_PP-yyyydddfnn.LAS - fw_laser - move the full waveform LAS files to here - naming convention LDR-FW-PPPP_PP-yyyydddfnn.LAS - navigation - copy the .sol file and .trj file to here - naming convention PPPP_PP-yyyy-dddf.*** - fw_extractions - this should contain the following information (This step is only required if an area is specified by the PI) * A folder for each requested area containing the relevant ASCII extractions * A text file describing the information given in the ASCII files. Template in ~arsf/arsf_data/2010/delivery/lidar/template/fw_extractions/extractions.txt. Use summarise_area.py to extract the extents for each area to enter into readme. Naming convention PPPP_PP-yyyy-dddf_extractions.txt * A jpg showing the location of the areas on an intensity image. Naming convention PPPP_PP-yyyy-dddf_extractions.jpg The Read_me will need to be edited to include the above information. A template of the full waveform readme can be found at ~arsf/arsf_data/2010/delivery/lidar/template/fw_readme.txt === Semi-scripted full waveform delivery === The delivery library can be used to perform a full waveform delivery. Still under testing but should work, to get the script to perform a full waveform delivery include the `--lidarfw` argument to the `make_arsf_delivery.py` script. The example below will create the full waveform directory structure. {{{ make_arsf_delivery.py --lidarfw --solfile posatt/ipas_honeywell/proc/20140621_082249.sol --lidardeminfo resolution=2 inprojection=UKBNG --projectlocation . --deliverytype lidar --steps STRUCTURE --final }}} When the script runs in full waveform mode the discrete classified lidar data needs to be in the `las-classified` folder, the classified full waveform data needs to be in `las-fw-classified` and trj files should be placed in `trj` all theses folders should be in `PROJ_DIR/processing/als50`, see below for a clipping of the `tree` command. Also ensure the logsheet pdf is in the `admin` folder as it will complain otherwise. I would suggest not running the whole delivery at once. What I found works best is running the steps before the rename stage then running the rest. There is still a few things that needs to be done manually, the intensity image is named `mosaic_image.jpg` not `PROJ_CODE-year_day-intensity.jpg` and the navigation SUP file is not copied across yet. The script that creates images has a bug somewhere, it puts .txt.jpg as the extension for the screenshots, running `rename.sh -f .txt.jpg .jpg` would fix that. {{{ #!html 
processing
├── als50
│   ├── 2014172.cfg
│   ├── 2014172.reg
│   ├── las
│   ├── las-classified
│   ├── las-fw
│   ├── las-fw-classified
│   ├── logfiles
│   └── trj
}}} ------------------- If you have hyperspectral data to make into a delivery, go to the [wiki:Procedures/DeliveryCreation/Hyperspectral hyperspectral delivery] page. If not, or if you've done that already, the delivery is ready for [wiki:Procedures/DeliveryChecking checking].