= Arrival of new flight data = This procedure should be followed on receipt of new flight data from NERC-ARF. If in any doubt about something (e.g.: a dataset has two project codes), contact NERC-ARF Operations. [[BR]] == Project Set Up == A semi-automated procedure -> [wiki:Procedures/NewDataArrival/ProjectSetUp] === Logsheet and Remaining Steps=== * Look at the logsheet included and verify that we have copies of all relevant data mentioned there. * In some cases, the flight crew may fly two projects back-to-back but enter all the data onto a single logsheet. If so, you may need to split the project directory into two, particularly if there's a large time gap (navigation needs separate processing) or the PIs are different (different delivery addresses/tracking). If you do need to split a project, ensure both copies have copies of common files (logsheets, rinex, etc), but that non-common files are not duplicated (ie. don't include hawk data for part 1 in part 2..). Also write in the ticket any changes made for tracking purposes. * Verify all details on the logsheet (esp. PI) by calling/emailing NERC-ARF Ops making them aware of the projects that have been unpacked - the application form and logsheet are not sufficient proof, nor do they track any changes in PI over the lifetime of the application. Make a logsheet that is suitable for delivery to end users. Use the {{{generateLogsheet.py}}} script and follow instructions: '''Using GUI''' * Run from top level - writes into 'admin' dir. You may wish to rename this dir before running to prevent any accidental overwriting. * Fill in the yellow boxes with information from supplied logsheet. * Blue boxes should be automatically filled in when you start the program but check the values are correct. * Click 'fill post manual'. This will calculate the values for the green fields based on the values you have entered into the yellow fields. You should also check that these fields look correct. If the flight was flown over midnight, you may need to correct them. '''Using Config file''' * Manually fill out a config file with the example format below * Run {{{generateLogsheet.py}}}, passing the config file path with the -c option * Suppress the GUI with the option -m autoonly For more advance running, you may specify a particular logsheet template e.g. -x .../logsheet_template_modular.xml [[BR]] A different output directory may be specified with the -o modifier {{{ proj_code = proj_name = pi_name = aircraft = pilot = copilot = operator = observer = base = log = engineon = engineoff = alignin = alignout = base_station = weather = takeoff_time = land_time = # leave blank or enter letter sortie = flight_description = }}} [[BR]] == Tickets and tracking == === Status Page === Add details to the [http://arsf-dan.nerc.ac.uk/status/addflight/ processing status page]. Under 'Data location' use the full path to the project and do NOT include server name (e.g use /users/rsg/arsf/... and not /data/visuyuan/...). === Ticket === Raise a [http://arsf-dan.nerc.ac.uk/trac/newticket new trac ticket] (type 'flight processing') for the new data. * Ticket summary should be of the form '''EU10/03, flight day 172/2011, Dennys Wood''' * Add short version of scientific purpose to guide processing (check NERC-ARF application) * Note arrival time of data * Set priority of ticket from project grading (try the grades subpages on [wiki:Projects]) * Note any specific comments that might help with processing * Owner should be blank * Verify the sensors that were requested in the application (primary) and those that weren't (secondary). Note in the ticket which these were. * Ticket body should contain: {{{ Data location: ~arsf/arsf_data/2011/flight_data/..... FILL IN Data arrived from NERC-ARF via SATA disk LETTER OR network transfer on DATE. Scientific objective: FILL IN FROM APPLICATION (just enough to guide processing choices) Priority: FILL IN FROM APPLICATION/WIKI PAGE (e.g. alpha-5 low), set ticket priority appropriately PI: A. N. Other EUFAR Project ID: CAFAM code: Any other notes.. = Sensors: = * Fenix (requested/not requested, flown/not flown) * Leica LIDAR (requested/not requested, flown/not flown) * OWl (requested/not requested, flown/not flown) * RCD (requested/not requested, flown/not flown) }}} [[BR]] == Create KML overview == When happy the directory is unpacked correctly run [wiki:Processing/makekmloverview make_kmloverview.py]. This will generate the web page and quicklooks of the data that are made available to the user. It will also generate a password which should be included in the email below. Check the username and password works by commenting out the following line: {{{ Allow from env=internal_proxy }}} from processing/kml_overview/.htaccess as this means a password isn't required for internal access. Remember to uncomment once you have finished. [[BR]] == Vectors == If the site is in the UK, check the [wiki:vectors vector page] to see if we have vectors for the site in question. If not, then email NERC-ARF-Ops and ask for them specifying the corner points of the area covered in OS BNG grid coordinates. Use bounding_box.py (needs to be run in the project directory) or use the generated nextmap DEM (below) to get the range of tiles, then do the conversion. It can take a couple of weeks before we get the vectors. [[BR]] == E-mail PI == Email the PI to inform them that their data has arrived to the Data Analysis Node for processing. Sample text: * fill in the 7 fields: , , , , , , * the date of arrival should be when the disks arrived or when the download begun * the username and password are available in the .htaccess file in processing/kml_overview or ~arsf/usr/share/kmlpasswords.csv. Note that make_kmloverview.py will need to have been run to create a password first unless the project code already exists for previous data. * cc to nerc-arf-processing * also cc to !neodc@rl.ac.uk * set reply-to to nerc-arf-processing * subject: `NERC-ARF data arrival notification ( [])` {{{ Dear , This is a notification that your NERC-ARF data for [], flown on , are at the NERC-ARF Data Analysis Node for processing (data received from NERC-ARF Operations on ). We aim to deliver as quickly as possible - our current processing priority order can be found at http://arsf-dan.nerc.ac.uk/status/order/ though please note that this queue is subject to change. You can follow progress at the following webpages: http://arsf-dan.nerc.ac.uk/status/progress/ - general status page http://arsf-dan.nerc.ac.uk/trac/ticket/ - our notes during processing (may be technical) Also available are KML (Google Earth) files that will allow you to view flight data coverage. These files are updated as the data are processed and more information becomes available. Click the following link and enter username and password details as below: username: password: Further information on KML previews: http://arsf-dan.nerc.ac.uk/trac/wiki/ProcessingAtDAN/KMLoverview If there are any specific processing requirements, or if you have additional data that may help with the processing (e.g. GPS basestation data, ground or atmospheric measurements), please contact us directly so we can take account of this before beginning processing. If you would like any more information, please feel free to contact us at arsf-processing@pml.ac.uk Regards, }}} Once the PI has been emailed commit the updated KML password file to ~arsf/live_git_repos/config_files/ (no need to push changes). [[BR]] == Basestation == Check there is basestation data for the flight. If not, ask ops if they have some or if we need to [wiki:Processing/GNSSStatinons download it].