== Airborne Laser Scanner (ALS) processing ==

General Processing with a settings (.reg) file

 1. Load in the reg file to set the specific settings for the project.
   * File > Load Settings
 1. Set the GoTo Folder to the main project directory
   * File > Set GoTo Folder
 1. Check the settings are appropriate for the project before proceeding (see below). This is important if using a reg file for a different project.
 1. Add the raw SCN data
   * Click Add and browse to the parent raw data directory.  This will add all flight lines in the immediate child directories.
 1. Select POS filename
   * Click Browse and add the .sol file
 1. Select the Output directory
   * Click Select > GoTo Folder and select <projname>/ProcLaser. You should create directory if it doesn't exist.
 1. Save settings for future re-processing purposes.
   * File > Save Settings
 1. Run the processing
   * Run > Run