Changes between Version 15 and Version 16 of Processing/Applanix

Timestamp:

Sep 19, 2007, 5:15:54 PM (17 years ago)

Author:

mggr

Comment:

--

Processing/Applanix

@@ -51 +51 @@
    1. Click the Subsystem setup button and enter the reference -> IMU (not general?) lever arm offsets from the table below:
    1. Run the process - read the messages for errors again!
- 1. You should now have a sbet file in .../Proc/sbet_YYYYJJJ.out
- 1. (optional) Output as ASCII - this isn't used for processing, but you might want to be able to look through the position estimates manually/programmatically
+ 1. You should now have a sbet file in .../Proc/sbet_YYYYJJJ.out - this is what's needed for processing
+ 1. Save project and exit POSPAC
+
+
+=== Optional extras ===
+
+Output as ASCII - this isn't used for processing, but you might want to be able to look through the position estimates manually/programmatically
    1. Hit 'OUTPUT', hit 'ok' (or hit XYZ button)
-   
+
+View the trajectory
 
 --------------