Changes between Version 45 and Version 46 of Processing/Applanix


Ignore:
Timestamp:
Mar 15, 2011 4:48:43 PM (9 years ago)
Author:
knpa
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Processing/Applanix

    v45 v46  
    1616     1. Select the Novatel file, click options and ''Make all epochs Kinematic'' (this is because the !NovAtel is the sensor on the plane, which is definitely kinematic!)
    1717     1. Run the conversion (check output for errors)
    18    1. Base stations (repeat for all base stations - in the Rinex dir)
     18   1. Base stations (repeat for all base stations)
    1919     1. Set receiver type to autodetect
    20      1. Point at the base station directory, probably Rinex, and 'Auto add all' (this should add a file, probably Rinex for the UK)
     20     1. Point at the base station directory and 'Auto add all' (this should add a file, probably Rinex for the UK)
    2121     1. Run the conversion (check output for errors, some health warnings are ok)
    2222   1. ''File -> Add Remote File'', select the gpb file in the applanix/Extract directory, defaults fine
    2323   1. (for all base stations - note: multiple base stations may need other stuff done)
    24      1. ''File -> Add Master File(s)'', select the gpb file in the basestation (Rinex) directory
     24     1. ''File -> Add Master File(s)'', select the gpb file in the basestation directory
    2525     1. (if you have gaps, it may offer to resample for you - not sure if we need to do this or not)
    2626     1. The basestation data will come with extra info specifying the precise location and antenna type.