| 11 | | 1. Create new project, aim at <data dir>/applanix. Name should be '''"YYYYJJJ.ppc"'''. Both filename kernels should be '''"YYYJJJ"'''. |
| | 11 | 1. Understand what you're doing! |
| | 12 | 1. Create new project, aim at <data dir>/applanix. Name should be '''"YYYYJJJ.ppc"'''. Both filename kernels should be '''"YYYYJJJ"'''. |
| | 13 | 1. Hit "Extract" |
| | 14 | 1. Kernel should be '''"YYYYJJJ"'''. |
| | 15 | 1. Read through output for errors - key things to look for are data gaps (if large, you may have to split the processing) |
| | 16 | 1. Hit "POSGPS" |
| | 17 | 1. Convert input files to GPB (File -> Convert -> Raw GPS to GPB) |
| | 18 | 1. Plane applanix |
| | 19 | 1. Set receiver type to autodetect |
| | 20 | 1. Point at the applanix/Extract directory (check this!) and 'Auto add all' (this should add a NovAtel OEM3 file) |
| | 21 | 1. Select the Novatel file, click options and ''Make all epochs Kinematic'' (this is because the Novatel is the sensor on the plane, which is definitely kinematic!) |
| | 22 | 1. Run the conversion (check output for errors) |
| | 23 | 1. Base stations |
| | 24 | 1. Set receiver type to autodetect |
| | 25 | 1. Point at the base station directory, probably Rinex, and 'Auto add all' (this should add a file, probably Rinex for the UK) |
| | 26 | 1. Run the conversion (check output for errors, some health warnings are ok) |
| | 27 | |
| | 28 | |
| | 29 | |
| | 30 | ----------- |
| | 31 | Todo: add in detailed notes from Applanix training course |