Changes between Version 7 and Version 8 of Processing/GrafNavProcessing/diffgnsssettings

Timestamp:

Oct 4, 2010, 4:05:37 PM (14 years ago)

Author:

knpa

Comment:

--

Processing/GrafNavProcessing/diffgnsssettings

@@ -1 @@
-== Settings to change to improve combined accuracy of trajectory ==
+== Settings to change to improve trajectory ==
 
 To be used with POSGNSS and Grafnav:
-
-- Reduce elevation mask (to min 10)
 
 - Change ionosphere settings (top part)
@@ -9 +7 @@
 - Increase KAR1 maximum distance for dual frequency (especially if your basestation is more than 30km away)
 
-- Process more or less of the flightline
+- Process more or less of the flightline.Cut out sections of the track if they have significant gaps (right click on the track and set start/end time in the appropriate places, then reprocess)
 
 - Measurement -> standard deviation (change to something that matches the mean of the red line on the graph under CA filter)
 
-- Lower the satellite horizon - you might do this to accept more satellite if there are an inadequate number covering an area (minimum 5 for decent quality)
-
-- Cut out sections of the track if they have significant gaps (right click on the track and set start/end time in the appropriate places, then reprocess)
+- Lower the satellite horizon (elevation mask). You might do this to accept more satellites if there are an inadequate number covering an area. Don't go below 10 though.