Changes between Version 18 and Version 19 of Processing/LeicaProcedure


Ignore:
Timestamp:
Sep 3, 2010 11:05:50 AM (9 years ago)
Author:
emca
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Processing/LeicaProcedure

    v18 v19  
    3131 * if GCPs available then compare them against LIDAR
    3232
     33=== Processing Full Waveform Data ===
     34
     35Once the discrete data has been processed, use the same .reg file (with the corrected roll value) to process the full waveform data.
     36
     37Load the .reg file in ALSPP. Under Inputs> Waveform Processing check the box Process Waveform Data. Ensure the correct trigger delay values are entered - these should be populated from the calibrated reg file.
     38
     39Load in the !RawLaser data and select Run.
     40
     41If you get an error "Unable to open the waveform file in selected folder" ensure that the raw data folders are in the correct structure - !RawLaser & RawWFD (case sensitive). The full waveform files will be in the format ***_4.LAS.
     42
     43Once the data has been processed it can be viewed in !TerraScan. Details on this can be found [wiki:Processing/TScanFW here ]
     44
     45At the moment, there are no tools available to do any post-processing of the full waveform data.
     46
     47
     48 
    3349----------------
    3450== Calibration Files ==