Changes between Version 34 and Version 35 of Processing/LeicaProcedure


Ignore:
Timestamp:
Sep 2, 2014 11:12:11 AM (5 years ago)
Author:
stgo
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Processing/LeicaProcedure

    v34 v35  
    33This page describes the basic steps involved in processing the Raw Scan data from the Leica ALS50 II. More information can be found [wiki:Sensors/LeicaLIDAR/MashUp here]
    44
    5 
    6 Instructions for processing with Alsproc (experimental) can be found [wiki:Procedures/AlsprocProcessing here]
    75-----
    86=== Navigation Processing ===
     
    1614=== Raw scan to point cloud ===
    1715
    18 This stage of the processing takes the raw scanner files and georeferences them to create a point cloud of the data. This is usually in the binary LAS format but may be output as ASCII if you wish.  This uses the ALSPP software.
     16This stage of the processing takes the raw scanner files and georeferences them to create a point cloud of the data. This is usually in the binary LAS format but may be output as ASCII if you wish.  This uses the ALSPP software, however it is recommended you use alsproc for roll and pitch corrections.
    1917
     18 * Instructions for processing with Alsproc (experimental) can be found [wiki:Procedures/AlsprocProcessing here]
    2019 * [wiki:Processing/ALSPP ALS Post Processor guide]
    2120