= LiDAR Calibration Notes - Software issues and Common mistakes = == Attune == * AutoBoreSight.exe error -"Boresight programme could not be found" * Resolution: Check projection is correct (UTM or OSGB) - Note: sometimes this doesn't fully resolve the issue, in which case currently no solution has been found. == lasground / ground_classify_las_bin.sh == * Failing on a section of line - Resolution: Use a different line or manually classify that line. == lascontrol == * Check that the command is correct inc parse using 's' for blank columns e.g. -parse sxyz for 4 columns == ALSPP == * RangeCardCal Error * Resolution: File missing from "Sent to" (C:\Documents and Settings\*user*\SendTo) folder. - Alternatively use a different user's account that has already been set up. * Pulse Rate error when loading in raw LiDAR data - Doesn't appear to change the result, currently no solution We are investigating the issues related to the software errors and have contacted the manufacturer Back to LiDAR Calibration Page [wiki:Processing/LidarCalibrationProcedure here]