Changes between Version 19 and Version 20 of Processing/LidarCalibrationProcedure


Ignore:
Timestamp:
Oct 16, 2009 4:20:20 PM (10 years ago)
Author:
knpa
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Processing/LidarCalibrationProcedure

    v19 v20  
    115115 * Save the text file.
    116116
    117 3. Preferably using data including areas of forest (little riss should do) and the BIT mode data, run Rangecardcal (from ALSPP tools menu) on all flightlines.
     1173. Preferably using data including areas of forest (little riss should do) and the BIT mode data, run Rangecardcal (from ALSPP tools menu) on all flightlines. (on ~45 degrees?).
    118118 * Enter the average dz value as A1 to get the other offsets.
    119119 * Add the outputs to the ALSPP dialog and save the settings reg file (to a new name)
    120120
    1211214. Analyse the results
    122  * Check these results and re-run using the full FOV (~45 degrees) on the low flightlines again.
     122 * Check these results and re-run using the full FOV (~45 degrees) on the low flightlines again (remember to change output back to normal folder)
    123123 * Check average dz is less than 1cm or so, and standard deviation <5cm in Terrascan control report. (also look at cross sections)
    124124 * Then process the 4 high altitude flights in ALSPP and check in Terrascan (around nadir and swath edges) (looking at absolute height).