GB07/12, flight day 99/2010, Debden

[benj]

Data location: ~arsf/arsf_data/2010/flight_data/uk/GB07_12-2010_099_Debden

Data arrived from ARSF via network transfer on 15th April 2010.

Scientific objective: Monitoring of peat fires and quantification of pyrogenic carbon conversion

Priority: a4l

PI: Martin Wooster

This is the post-burning flight relating to #323 and #324

Sensors:

• Eagle : Delivered 13/08/2010
• Hawk (08/12/2010)
• Leica LIDAR : Delivered 13/08/2010
• Digital Photography (07/09/2010)

[benj]

Eagle has an extra blank line collected near Nottingham (they were going to do another collection and were put off by the weather). I have removed line 099-10-1.* from the Eagle directory (it's static, presumably running with the lens cap on because they weren't actually trying to collect data). I have also removed SWIR099-10-12.nav from the Hawk directory - it has no associated raw (or other) file.

[pmlvis10]

IPAS navigation for this project has been processed.

[ella]

Looks like the applanix navigation processing has been done. Saved in arsf Samba workspace.

[anch]

Hyperspectral processed

[knpa]

Delivery checked.

All checks out apart from:

• 5 Readmes - delete all apart form pdf.
• Readme contents section - flightline named in right-hand side column should be name from logsheet e.g. '020'
• 'Quality issues...' Section - "Digital Elevation Modeland tested" - should be space between "Model" and "and"
• Formatting on azgcoor command incorrect, put on correct lines and make sure to escape newlines with '\'
• eagle lev1 images look strangely squashed...need to investigate this.

Have not checked hawk due to current bandsetting issue. Be sure to get this checked before delivering.

[benj]

Timing offsets taken from config file

Line	Eagle SCT	Hawk SCT
3	0.94	0.00
4	1.70	0.04
5	1.20	0.00
6	1.01	0.00
7	1.00	0.53
8		0.42
9	0.01	1.09
10	0.01
11		1.17
12	0.04

[jb362]

Beginning LiDAR processing

[jb362]

Abandoned LiDAR processing!

[benj]

Why abandoned?

[jb362]

Abandoned because I am making the fixes on my delivery checked projects, then starting the hyperspectral processing in the unpacking folder so will leave this for the next person to do.

[anch]

I have started the LIDAR processing for this project.

.LAS files have been created in ALSPP and I am now doing QC in lag

[anch]

LIDAR processing of this project is complete and ready for checking.

I have added it to the delivery checking list.

[jb362]

Starting LiDAR delivery check

[jb362]

LiDAR delivery check looks fine.

[anch]

Eagle hyperspectral and LiDAR data have been dispatched on disk.

The data was put on the same disk as project GB08/19, as they were both for the same PI.

Eagle and LiDAR have been rsynced.

[emca]

Camera images processed and ready for delivery check at
~airborne/workspace/GB07_12-2010_099_Debden/delivery/20100820/GB07_12

Removed images 1-9 as they did not cover the study area

[jb362]

Delivery checking camera.

[jb362]

Camera delivery looks fine.

[mark1]

Photography data dispatched to PI on 07/09/2010

[mark1]

Hawk has been delivery checked. Read me needs regenerating to remove files listed that are not present. Otherwise OK to deliver.

[emca]

Hawk data sent 08/12/2010