EUFAR10/02, 199a/2010, Santander

[jb362]

Data location: ~arsf/arsf_data/2010/flight_data/western_europe/EUFAR10_02-2010_199a-Santander

Data arrived from ARSF via network transfer on 26/07/2010.

Scientific objectives:

1 Development of a reliable tool to estimate coastal water quality indicators by using remote sensing techniques, both airborne and satellite.

1.1. Development of a set of semi-empirical algorithms based on hyperspectral airborne and in-situ data for estimating the concentrations of the water constituents;
1.2. Migration of the developed algorithms into the satellite workflow.

2. Implementation of an automatic warning system based on satellite imagery processing;

3. Inclusion of the information obtained by means of remote sensing in the dataset used for the calibration of regional hydrodynamic models.

Priority: a4m - awaiting confirmation

PI: Castillo-Lopez

Sensors:

• Eagle (28/08/2010)
• Hawk (21/12/2010)
• Leica LIDAR (Requested by PI)
• RCD Digital Photography (28/08/2010)

[jb362]

Begun IPAS processing

[jb362]

IPAS and Applanix processing complete

[jb362]

Beginning hyperspectral processing

[jb362]

Eagle SCT offsets:
e1: 0.04
e2: -0.01
e3: 0.08
e4: -0.10
e5: -0.05
e6: -0.08
e7: 0.09
e8: -0.18
e9: 0.28
e10: -0.30
e11: 0.09
e12: 0.05
e13: -0.06
e14: -0.10
e15: 1.26
e16: 0.00
e17: 0.03
e18: -0.07
e19: 0.03

The large SCT offset for flight line 15 is due to a sync error.

The header file for eagle flight line 16 had to be corrected so that "lines = 9596", rather than "lines = 1837" as in the original header file.

[jb362]

Ready for delivery check.

[iopa]

Starting delivery check.

[iopa]

Hyperspectral delivery check report:

1. There is a bunch of hidden files in the delivery directory EUFAR10-01 that need removing.
2. Missing bin directory with instructions of how to download azgcorr.

Otherwise all seems fine :).

[iopa]

Taking camera for this.

[jb362]

Delivery checking camera.

[jb362]

Everything looks fine. You just need to change the Readme from Elena Castillo-Lopez to Dr Castillo-Lopez

[iopa]

Camera is ready to deliver.

[jb362]

Camera and eagle data delivered.

[knpa]

Data moved from overflow to repository.
Can now be r-synced.

[benj]

Have downloaded 1s RINEX data from University of Cantabria and copied to repository. Relevant section of email from PI was as follows:

SANTANDER and TORRELAVEGA stations are in relation with the calibration site "Santander1" and the LAREDO station for the area of validation (Santander 2). Santander 1 data taken on 18th July and Santander2  data taken on 19th July.
In the corresponding tabs appear links to download RINEX data.
 
LINKS of interest:
 
http://www.gnss.unican.es/estaciones/cant.asp
 
http://www.gnss.unican.es/estaciones/trvg.asp
 
http://www.gnss.unican.es/estaciones/lare.asp
 
ftp://ftpgnss.digteg.unican.es/rinex
 
Access to real time corrections using the standard protocol NTRIP (Networked Transport of RTCM vía Internet Protocol):
 
URL 	http://ntrip.unican.es:2101/	 
IP:    	193.144.202.127	 
Port: 	21 
User: 	anonimous
 
link: http://www.gnss.unican.es/servicios/services.asp

[benj]

Note I believe the Santander station mentioned with code CANT is the data I have downloaded from REIN. This is because if you go to the first link given the title of the web page is "Estación de Reinosa"

[emca]

Starting LiDAR processing

[knpa]

Hawk has been reprocessed, preparing delivery.

[knpa]

Scratch that, anch is dealing with this one apparently.

[mark1]

Hawk delivery checked. Minor corrections to ReadMe needed (as discussed), screenshot for line 15 missing, level1 for line 01 shows bands 0,1,2 set to 0. Should mention overflows in read me also.

[anch]

Reprocessed hawk lev1s and put in delivery

[benj]

Fixed project ID in ticket (was down as EUFAR10/01)

[knpa]

Checking level 1's.

[knpa]

Mark taken over delivery check.

[mark1]

Hawk data delivery checked and looks OK. Ready to re-deliver.

[anch]

Hawk delivered 21/12/2010