EUFAR10/03, flight day 197/2010,Lisbon

[ella]

Data location: ~arsf/arsf_data/2010/flight_data/western_europe/EUFAR10_03-2010_197_Lisbon

Data arrived from ARSF via network transfer on 2nd/08/2010.

Scientific objectives: Objective 1.- Development of a reliable tool to estimate coastal water quality indicators by using remote sensing
techniques, both airborne and satellite.
1.1. | Development of a set of semi-empirical algorithms based on hyper-spectral airborne and in-situ data for
estimating the concentrations of the water constituents;
1.2. | Migration of the developed algorithms into the satellite workflow.

Priority: a4h

PI: Jose da Silva

Sensors:

• Eagle (Requested by PI)
• Hawk (Requested by PI)
• Leica LIDAR (03/12/2010)
• RCD Camera (03/12/2010)

[jb362]

Starting hyperspectral processing

[jb362]

Leaving this hyperspectral processing to be picked up again once we have a logsheet for the flight. Applanix navigation has been done.

[jb362]

Starting camera processing.

[ella]

IPAS navigation now processed.

[jb362]

Trying hyperspectral processing again without the logsheet.

[jb362]

Doesn't look like this will work so will have to wait for logsheet still.

[jb362]

Ignore last comment!

[jb362]

The eagle lev3 flight lines for this project do not appear to match up with the kml file when opened in gtviewer. We have decided to wait for the logsheets to see if those can shed any more light on the situation. Also, this flight is almost entirely over the ocean (with only a tiny piece of land visible on one flight line) and therefore (1) will not require a DEM and (2) will be impossible to find SCT offsets for.

[jb362]

Photographs 1-22 removed as they did not cover the study area.

[emca]

Logsheet has arrived and been saved in ~arsf/arsf_data/2010/flight_data/archive-overflow/EUFAR10_03-2010_197_Lisbon/admin

[jb362]

Iopa will be taking over delivery of this for me.

[ella]

RCD delivery check complete, ready to deliver.

[iopa]

RCD camera was dispatched today, 16th September 2010.

[knpa]

Moved to repository, can be rsynced.

[benj]

Corrected PI (recorded wrong on data unpacking)

[knpa]

Appears to be an issue with the bandset labels in the header files; they start at 900nm which is lower than it should be. Possibly incorrect bandset selected or none specified. Will leave this until end of the year and new Hawk calibration.

[iopa]

Taking eagle.

[emca]

Starting LiDAR processing

[emca]

LiDAR processing complete. Ready for delivery check at
~airborne/workspace/EUFAR10_03-2010_197_Lisbon/delivery/20101112/EUFAR10_03

LiDAR data was collected as one continuous line which has been split to match approximately with the Eagle/Hawk data. It was not possible to correct for roll and no DEM was created for the delivery as this project is entirely over water.

[iopa]

LiDAR has been checked,

no errors in the data or the delivery, ready to go.

[emca]

LiDAR and Photography dispatched 03/12/2010

(note: photography is a re-delivery as data sent on 16/09/10 was sent to the wrong PI)