EUFAR10/01 (AIMWETLAB), flight day 235b/2010, Lake Balaton Peninsula

[iopa]

Data Location: ~arsf/workspace/EUFAR10_01-2010_235b_Lake_Balaton_Peninsula

Data arrived from ARSF via SATA disk Q on 15/09/2010.

Scientific objective: Mapping of species composition and stand health of shore vegetation, mapping of shore elevation and inundation structure.

This flight will also be used for EUFAR10-07.
Scientific Objective: High accuracy land use/land cover mapping, forest type mapping and invasive shrub species location

Priority: a4h

PI: A.Zlinszky

Note; the symlinks from the workspace point to the archive-overflow in ~arsf/arsf_data/2010/flight_data/ and therefore will break when space is available for the project to be moved out of there.

Sensors:

• Eagle (28/03/2011)
• Hawk (28/03/2011)
• Leica LIDAR (04/03/2011)
• Digital Photography

[iopa]

Please note that eagle files 5-7 still need to be downloaded from thelma.

[knpa]

Added scientific objective.

[knpa]

This flight will also be used for EUFAR10-07.

[iopa]

From an email by Phil Goy on 19/10/2010,
Eagle files VNIR235b-10-5.raw,VNIR235b-10-6.raw,VNIR235b-10-7.raw
are unrecoverable and we will have to process only the partial
ones we already have.

The headers for those still need to be fixed to match the partial raws.

[iopa]

The headers have been fixed and the lines are processable as any other, BUT

for lines 5-7;
azspec_args_extra needs to contain (at least):
azspec_args-extra = -sdr eagle/darkFrames.bil -sdh eagle/darkFrames.bil.hdr

Those dark frames have been extracted from VNIR235b-10-1.raw, it has been tested as far as azspec and seems to work. If any problems arise in next stages for those lines, keep this in mind.

[iopa]

The above is for eagle only.

[knpa]

Appears to be an issue with the bandset labels in the header files; they start at 900nm which is lower than it should be. Possibly incorrect bandset selected or none specified. Will leave this until end of the year and new Hawk calibration.

[knpa]

Taking camera.

[knpa]

All images look OK, no major over/under exposure or shots of bay doors.

[knpa]

Doing ipas.

[knpa]

Completed ipas using lidar lever arm.

Still some dispute over correct camera lever arm, will do camera version of sol file when this has been resolved.

Taking Lidar.

[knpa]

Lidar complete and ready for delivery check at:

~airborne/workspace/EUFAR10_01-2010_235b_Lake_Balaton_Peninsula/delivery/20110211/

[iopa]

Checking LiDAR.

[iopa]

LiDAR check;

delivery is in order and ready to go.

As mentioned in the readme, some noise remains unclassified over water, which is outside the area of interest.

[knpa]

Fixed PI name misspelling.

[anch]

Camera, and hyperspectral sent to PI

[anch]

Ignore the above comment.

Actually is was the LiDAR sent to PI.

Hyperspectral and Camera are still to be delivered.

[iopa]

Taking hyperspectral.

[knpa]

Camera delivery has been created but there are some photos not over a flightline that have been missed and there is a flightline included in kml that shouldn't be (it's a void line).

[knpa]

Fixed above points.

Camera ready for delivery check at: /users/rsg/airborne/workspace/EUFAR10_01-2010_235b_Lake_Balaton_Peninsula/delivery/20110304/EUFAR10_01

[anch]

Delivery check complete.

All fine and ready to go

[iopa]

Hyperspectral ready for checking at ;

~airborne/workspace/EUFAR10_01-2010_235b_Lake_Balaton_Peninsula/delivery/20110314/EUFAR10_01

[iopa]

Eagle & Hawk SCT offsets

[emca]

Delivery checked hyperspectral data. All looks good, ready to deliver.

[iopa]

Hyperspectral & Photography have been dispatched (28/03/2011)