EU11/03, flight day 142/2011, Jimena

[knpa]

Data location: /users/rsg/arsf/arsf_data/2011/flight_data/spain_portugal/EU11_03-2011_142_Jimena

Data arrived from ARSF via network transfer on 24/05/2011

EU11/03 Scientific objective: We wish to measure how these forests change over gradients of topography‐controlled climate and soil properties

EU11/03 Priority: Alpha 4l

PI: David Coomes

Sensors:

Eagle (15/08/2011)
Hawk (15/08/2011)
LiDAR (15/08/2011) and (29/03/12)
Camera (18/07/2011)

[anch]

Processing RAW camera to tif

[anch]

Processing IPAS

[anch]

Produced thumbnails from tifs

[anch]

IPAS processed.

Produced sol with LIDAR and camera lever arms, and converted one to SBET for hyperspectral processing.

[anch]

Produced camera ImageEvents1_processed file with IPAS CO

[benj]

LiDAR processing currently blocked until we get a new boresight flight

[benj]

Will Simonson obtained additional base station data for SFER base station for this flight date, have downloaded it and put it with the rest of the data for this flight in the repository.

[anch]

Reprocessed the navigation with new basestation data and got a much better result.

Have generated new SOL files for camera, lidar and SBET for hyperspectral.

Have recreated the camera delivery with reprocessed SOL file and it is ready for delivery check.

Have started processing hyperspectral data with new SBET.

[iopa]

Camera delivery check ;

• readme proj code _ to / if tex is available

otherwise all is good and ready to go.

[anch]

Putting SCT correction on hold until LiDAR can be processed so that it can be verified against an intensity image

[emca]

Camera data sent to PI 18/07/2011

[jaho]

Obtained intensity image to use for SCT correction. Continuing eagle and hawk processing.

[jaho]

Hyperspectral data ready for delivery check.

[jaho]

LIDAR delivery check:

No errors found. Data ready to deliver.

[adbe]

Delivery check complete.
Data ready to deliver

[adbe]

Data has been delivered
Data on disk 112: -

-142 lidar
-142 hyperspectral
-141 lidar

Delivered to David Coombes on 15/08/2011

[mark1]

Hyperspectral hawk bad pixel files and XML files have been re-created and re-delivered to PI (via email). This corrects sample number in bad pixel text files and Eagle IFOV value in XML and extra comments included.

[adbe]

Hyperspectral sct's

line	eagle	hawk
1	-0.05	-0.05
2	-0.02	-0.07
3	-0.04	-0.03
4	-0.5	-0.10
5	-0.12	0.04
6	-0.11	-0.11
7	-0.01	-0.02
8	-0.09	-0.05
9	-0.04	-0.04
10	-0.03	-0.04
11	-0.05	-0.05
12	-0.03	-0.05
13	-0.05	-0.08
14	-0.04	-0.08
15	-0.04	-0.03
16	-0.03	-0.05
17	-0.01	-0.02
18	-0.02	1.17

[emca]

Received an email from Will Simonson 09/02/2012 to say the data did not
match up with overlapping lines from day 102 (ticket #395 ).

Vertical offset ~1.2 meters and horizontal shift visible. Reprocessed
the navigation data using a network adjusted temporary base station.
Original data was processed without the correct IBRC file. Data was also
found to have a pitch offset.

Have reprocessed the data and made available to W Simonson via ftp.

[knpa]

Beginning archiving.

[knpa]

No project information xml was included with the delivery.