ET12/17, flight day 321/2012, Corbetti_Alutu

[mark1]

Data location: /users/rsg/arsf/arsf_data/2012/flight_data/ethiopia/ET12_17-2012_321_Corbetti_Alutu/

Data arrived from ARSF via SATA disk on 06/12/2012

ET12/17 Scientific objective:

ET12/17 Priority: a4h

PI: David Pyle

Sensors:

Camera (05/03/2013)
Eagle (Requested)
Hawk (Requested)
LiDAR (05/03/2013)

[mark1]

GPS basestation data acquired via ftp 17/12/12

[mark1]

Note to whoever starts processing this project - it may be simpler in the long run to split this project up into 2 [a for corbetti, b for alutu]. See how the navigation processing goes.

[tipo]

Started Hyperspectral Processing.
used ppp for navigation, but could only get '2's on GrafNav

[tipo]

Finished Hyperspectral processing.

[edfi]

Starting Hyperspectral delivery check

[edfi]

Digital logsheet needs to be generated and added into the delivery.
Is there supposed to be a h321191? I can't see one, meaning uneven numbers of lines between eagle and hawk. Is this correct?
All else seems fine

[tipo]

There's a line listed in the logsheet as "HAWK FAULT" which must be why the lines are uneven.

[tipo]

PDF logsheet generated an put in delivery.

[besm]

Starting hyperspectral delivery check.

[besm]

Delivery check completed. The progress details of the ticket show this has been delivery checked before, and there's a tmp_cmd_check directory already present, but I saw nothing written here so I went ahead and did everything. Issues found:

• Dubious about the sct values of eagle lines 11 & 16, and hawk line 15. (I looked at the existing tmp_cmd_check directory. If this has been fixed, tell me and I will do that step again.)
• Looks like there's a dropped scan on eagle line 8 that'd be worth mentioning in the readme.

[edfi]

Current basestations not currently good enough, waiting for new data

[edfi]

Replying to edfi:

Current basestations not currently good enough, waiting for new data

(For LiDAR processing)

[mark1]

Raw basestation files arrived (ftp) - copied into basestation/raw

[edfi]

Re-attempting navigation with new basestation data

[edfi]

Nav complete, default settings used in alspp. Still need to look to see if pitch/roll adjustment is required

[anhi]

RCD Delivery Created.

[edfi]

Starting RCD check

[edfi]

Check complete. Ready to deliver

[tipo]

Corrected hyperspectral lines e11, e16 and h15 and mentioned the dropped scan in the readme.

[benj]

PI has requested that this flight be processed using the December 2012 calibration - please process the hyperspectral data accordingly.

[edfi]

LiDAR Ready for delivery check

[anhi]

LiDAR Delivery check:

No problems, ready for delivery.

[anhi]

Delivered LiDAR and rcd data on 05/03/2013 on disk 152 to David Pyle, University of Oxford.