Opened 12 years ago
Last modified 11 years ago
#471 new flight processing
ET12/18, flight day 318/2012, Rift
Reported by: | mark1 | Owned by: | |
---|---|---|---|
Priority: | alpha 4 medium | Milestone: | |
Component: | Processing: general | Keywords: | |
Cc: | Other processors: |
Description (last modified by besm)
Data location: /users/rsg/arsf/arsf_data/2012/flight_data/ethiopia/ET12_18-2012_318_Rift/
Data arrived from ARSF via SATA disk on 06/12/2012
ET12/18 Scientific objective:
ET12/18 Priority: a4m
PI: Tim Wright
Notes: Lidar and camera are higher priority than hyperspectral
Sensors:
Camera (01/02/2013)
Eagle (09/05/2013)
Hawk (09/05/2013)
LiDAR (01/02/2013)
Change History (21)
comment:1 Changed 12 years ago by besm
comment:2 Changed 12 years ago by besm
Completed nav processing. Used DAYR basestation for best result. Could not get red line on combined seperation graph below 0.05m.
comment:3 Changed 12 years ago by besm
Started RCD and LiDAR processing.
comment:4 Changed 12 years ago by besm
Permitting for things like height differences and possibly iffy navigation solution, the pitch and roll values I'm going ahead with are:
Roll: 0.0004592
Pitch: -0.00298
comment:5 Changed 12 years ago by besm
The original 206a-derived pitch and roll values look much better for the short flightlines:
Roll: 0.00023
Pitch: -0.00298
comment:6 Changed 12 years ago by besm
RCD delivery ready for delivery check.
comment:7 Changed 12 years ago by besm
LiDAR delivery ready for delivery check.
comment:8 Changed 12 years ago by anhi
RCD delivery check:
No problems.
comment:9 Changed 12 years ago by anhi
LiDAR Delivery Check:
No problems.
comment:10 Changed 12 years ago by anhi
Delivered LiDAR and rcd data on 01/02/2013 on disk 129 to Tim Wright, University of Leeds.
comment:11 Changed 12 years ago by anhi
- Description modified (diff)
comment:12 Changed 12 years ago by benj
Tim has requested that we interpolate calibration files between the start and end of 2012 for his Ethiopia data. Please use bil_interp.py to generate an appropriate calibration file for this flight day.
comment:13 Changed 11 years ago by besm
Hyperspectral data is ready for delivery checking now that the calibration has been interpolated and processing has been completed. Some delays due to changes to directory locations interfering with processing - possibly the first flight to be processed since the changeover. Every file appears to be there though.
comment:14 Changed 11 years ago by anhi
Hyperspectral Delivery check:
- Readme missing from delivery
- Dropped scans in lines: e2, h4, h10
- Eagle and hawk line 8 scts look a little off matching against other lines, but may be as good as it can get.
comment:15 Changed 11 years ago by besm
Ammended readme and remembered to move it into the delivery directory this time. Ready for delivery checking. Didn't do anything for line 8 scts, as that flightline looks accidental anyway, not likely to be needed or used.
comment:16 Changed 11 years ago by anhi
Hyperspectral Delivery check:
No problems found
comment:17 Changed 11 years ago by besm
Creating delivery for hyperspectral data now
comment:18 Changed 11 years ago by besm
Hyperspectral (interpolated calibration) dispatched on 09 May to PI at:
Tim Wright
Room: 8.142,
Maths/Earth and Environment Building,
The University of Leeds,
Leeds,
LS2 9JT
comment:19 Changed 11 years ago by besm
- Description modified (diff)
comment:20 Changed 11 years ago by emca
Preparing data for archive
comment:21 Changed 11 years ago by emca
Data ready for archiving. Email sent to Wendy@NEODC 29/10/2013.
Went to convert RCD raw data to tiffs, but found the job had already been done. Awaiting basestation data to proceed further.