Opened 12 years ago
Last modified 11 years ago
#471 new flight processing
ET12/18, flight day 318/2012, Rift — at Version 11
Reported by: | mark1 | Owned by: | |
---|---|---|---|
Priority: | alpha 4 medium | Milestone: | |
Component: | Processing: general | Keywords: | |
Cc: | Other processors: |
Description (last modified by anhi)
Data location: /users/rsg/arsf/arsf_data/2012/flight_data/ethiopia/ET12_18-2012_318_Rift/
Data arrived from ARSF via SATA disk on 06/12/2012
ET12/18 Scientific objective:
ET12/18 Priority: a4m
PI: Tim Wright
Notes: Lidar and camera are higher priority than hyperspectral
Sensors:
Camera (01/02/2013)
Eagle (Requested)
Hawk (Requested)
LiDAR (01/02/2013)
Change History (11)
comment:1 Changed 12 years ago by besm
comment:2 Changed 12 years ago by besm
Completed nav processing. Used DAYR basestation for best result. Could not get red line on combined seperation graph below 0.05m.
comment:3 Changed 12 years ago by besm
Started RCD and LiDAR processing.
comment:4 Changed 12 years ago by besm
Permitting for things like height differences and possibly iffy navigation solution, the pitch and roll values I'm going ahead with are:
Roll: 0.0004592
Pitch: -0.00298
comment:5 Changed 12 years ago by besm
The original 206a-derived pitch and roll values look much better for the short flightlines:
Roll: 0.00023
Pitch: -0.00298
comment:6 Changed 12 years ago by besm
RCD delivery ready for delivery check.
comment:7 Changed 12 years ago by besm
LiDAR delivery ready for delivery check.
comment:8 Changed 12 years ago by anhi
RCD delivery check:
No problems.
comment:9 Changed 12 years ago by anhi
LiDAR Delivery Check:
No problems.
comment:10 Changed 12 years ago by anhi
Delivered LiDAR and rcd data on 01/02/2013 on disk 129 to Tim Wright, University of Leeds.
comment:11 Changed 12 years ago by anhi
- Description modified (diff)
Went to convert RCD raw data to tiffs, but found the job had already been done. Awaiting basestation data to proceed further.