Opened 11 years ago
Last modified 6 years ago
#482 new flight processing
EM10/06, flight day 134/2013, Perugia
Reported by: | edfi | Owned by: | benj |
---|---|---|---|
Priority: | alpha 4 medium | Milestone: | |
Component: | Archiving | Keywords: | |
Cc: | Other processors: |
Description (last modified by tipo)
Data location: /users/rsg/arsf/arsf_data/2013/flight_data/italy/EM10_06-2013_134_Perugia
Data arrived from ARSF via network transfer on 21/05/2013
EM10/06 Scientific objective:
EM10/06 Priority: a4m
PI: Ken McCaffrey
Sensors:
Camera (Delivered 9/8/2013)
Eagle (Delivered 9/8/2013)
Hawk (Delivered 9/8/2013)
LiDAR (Delivered 9/8/2013)
Change History (22)
comment:1 Changed 11 years ago by edfi
- Description modified (diff)
comment:2 Changed 11 years ago by edfi
comment:3 Changed 11 years ago by edfi
- Description modified (diff)
comment:4 Changed 11 years ago by edfi
- Description modified (diff)
comment:5 Changed 11 years ago by anhi
Finished Nav processing
comment:6 Changed 11 years ago by anhi
- Description modified (diff)
- Summary changed from EM10/06, flight day 135/2013, Perugia to EM10/06, flight day 134/2013, Perugia
comment:7 Changed 11 years ago by tipo
Started LiDAR processing
comment:8 Changed 11 years ago by knpa
Beginning RCD processing.
comment:9 Changed 11 years ago by tipo
LiDAR delivery created.
comment:10 Changed 11 years ago by anhi
LiDAR Delivery check:
No problems found.
comment:11 Changed 11 years ago by anhi
SCTs for hyperspectral processing. The navigation was invalid for all lines.
The hdr files GPS data froze at 08:44 so GPS values were obtained from the electronic logsheet and new hdr files were made. This has resulted in much larger SCTs than usual.
Eagle and Hawk line 13 was too small to SCT and there was a note on the logsheet that it is not a proper line so will not be processed and the other lines will be renamed.
Flightline | Eagle SCT | Hawk SCT |
1 | 2.69 | 2.53 |
2 | 2.88 | 1.27 |
3 | -31.09 | -31.98 |
4 | 23.913 | 23.77 |
5 | 25.35 | 25.04 |
6 | 24.08 | 23.68 |
7 | 13.24 | 12.54 |
8 | 14.95 | 14.05 |
9 | -8.79 | -8.32 |
10 | 12.20 | 12.58 |
11 | 2.82 | 2.29 |
12 | 3.27 | 3.34 |
13 | -15.64 | -8.63 |
14 | -23.44 | -22.05 |
15 | -35.37 | -33.21 |
16 | -19.44 | -16.47 |
17 | 8.52 | 9.21 |
18 | -33.40 | -32.76 |
19 | 13.82 | 14.62 |
20 | -7.74 | -7.17 |
21 | 35.55 | 35.44 |
22 | 29.99 | 30.22 |
comment:12 Changed 11 years ago by anhi
Hyperspectral delivery created
comment:13 Changed 11 years ago by edfi
RCD D/C Complete no problems found
comment:14 Changed 11 years ago by tipo
Delivery checked hyperspectral. No problems found.
comment:15 Changed 11 years ago by tipo
Camera, hyperspectral and LiDAR delivered.
comment:16 Changed 11 years ago by tipo
- Component changed from Processing: general to Archiving
- Description modified (diff)
- Owner set to benj
comment:17 Changed 11 years ago by tipo
Lidar was mistakenly processed as UTM32 intstead of UTM33.
Reprocessing using UTM 33.
comment:18 Changed 11 years ago by tipo
LiDAR reprocessed and new delivery created.
comment:19 Changed 11 years ago by anhi
LiDAR Delivery check:
No problems found, ready for delivery.
comment:20 Changed 11 years ago by tipo
Redelivered LiDAR 21/08/2013
comment:21 Changed 10 years ago by lah
Submitted to NEODC for archiving 16/09/2014.
comment:22 Changed 6 years ago by wja
Archiving
Data is already backed up on CEDA but no JSONs have been created.
Have created and RSYNCed JSONs to CEDA.
Changed the prefix of the Eagle and Hawk files to be VNIR and SWIR respectively.