BGS12/01, flight day 163c/2014, Merthyr

[knpa]

Data location: /users/rsg/arsf/arsf_data/2014/flight_data/uk/BGS12_01-2014_163c_Merthyr/

Data arrived from ARSF via network transfer on 13/06/2014

BGS12/01 Scientific objective: unknown

BGS12/01 Priority: 8

PI: Colm Jordan

Sensors:

Camera (22/10/2014), Archvied 13/05/2015
LiDAR (22/10/2014), Archvied 13/05/2015
FW LiDAR (22/10/2014), Archvied 13/05/2015

[knpa]

Deleted corrupted webcam image 124333

[tec]

Started RCD processing.

[tec]

Started nav processing

[tec]

BREC Basestation Data
Latitude	51 57 10.38483
Longitude	-3 22 54.24611
El Height	242.211m

CARI Basestation Data
Latitude	51 31 51.84544
Longitude	-3 06 24.48358
El Height	93.119m

[tec]

CARI Basestation not used.

Processed the GPS time from 388920.000 till 393600.000
Set the elevation mask to 13.5 degrees to achieve the best possible results with an L2C phase correction of 0.25 cycles.

There is a spike in the latitude seperation which goes above a seperation of 0.1m this spike could affect upto the first 10 seconds of flightline number 8.

[tec]

Finished Nav processing.

Started RCD processing.

[tec]

Finished RCD processing

[dap]

Started delivery checking RCD

[dap]

RCD delivery check complete. No problems were found.

[tec]

Starting LiDAR processing.

[tec]

Having a range gate problem with the LiDAR.

[tec]

Continuing LiDAR processing.

[tec]

LiDAR

Flight line	Roll	Pitch
120614	-0.005809263	-0.000857190
121418	-0.005809263	-0.000857190
122250	-0.005809263	-0.001157190
123045	-0.005609263	-0.000857190
123819	-0.005889263	-0.001157190
124552	-0.005509263	-0.000857190
125347	-0.005709263	-0.000857190
130115	-0.005609263	-0.000857190
131410	-0.005609263	-0.000857190

[tec]

Ready for DC

[dap]

Beginning LiDAR Delivery Check

[dap]

LiDAR Delivery Check

Complete. Found the following minor problems:

• Weather notes, altitude and speed not present on typed up logsheet
• PI has not been emailed about vectors yet - ask before data are sent.
• Both documents in doc/ are named wrong - I've renamed these.
• sup file does not need to be delivered - I've removed this.
• incase in "Data details" section is two words.
• Data quality remarks - be more specific (say which flightline has the hole) and, if you know why it has the hole, say why and what this means. Instead of "There is cloud at the end of most flight lines.", I would write something more detailed like "This dataset was severely affected by cloud coverage. This has been classified as noise (classification 7)."
• Dan's surname is spelt wrong in the readme, page 11 ("Clewly" should be "Clewley").
• Discrete ASCII flightlines should have CRLF line terminators
• Too much foliage has been classified as noise. This will need to be classified to classification 1 before the data are sent. Will then need to re-sort the LAS files using lassort, convert them to ascii and copy the classification over to the las1.3 files.

Dataset will need to be rechecked when the LAS files have been reclassified.

[tec]

LiDAR
Disregarding stuff about weather notes, logsheet is fine. Data quality says the first flightline has the hole, that is sufficient.

[tec]

LiDAR
Ready for DC

[dap]

LiDAR Delivery Check

• Pre-vector email still needs to be sent to PI - ensure this is done before delivery of data.
• Typos still existed in read me document with Dan's surname and the word "incase" - I have fixed these.
• Have also removed knpa from the contact details section in read me (not a problem in first quality check as he was still at PML at this point).
• las1.0/ was incorrectly named - have renamed this to las1.2.
• ascii las file line endings needed to be converted to CRLF line terminators - I've done this using unix2dos * in ascii directory.

Full waveform data has not yet been checked - waiting for Windows machine to become free.

[dap]

LiDAR Delivery Check

laszip completed, created 9 wdz files and 9 laz files, as expected. Will check las 1.3 files in Wave Viewer when Windows machine becomes available.

[dap]

LiDAR Delivery Check

Checked files in Wave Viewer. The following records don't have waveforms:

• File 01: the first ~10,000
• File 02: the first ~11,000
• File 04: the first ~50,000
• File 07: the first ~45,000
• File 08: the first ~16,000

[tec]

So the delivery is ok?

[dap]

LiDAR Delivery Check

Spoken to mark1 regarding the missing waveforms, this is a known issue. Data at
BGS12_01-163c-lidar-20140926 is therefore ready to be delivered.

[dap]

Copying LiDAR data and photography to hard drive for delivery.

[dap]

LiDAR data and photography delivered to Dr Colm, 22/10/2014.

[tec]

Archiving
Starting Archiving

[tec]

Archiving
Done confirmed as of 13/05/2015 12:10