Opened 10 years ago

Closed 9 years ago

#527 closed flight processing (fixed)

BGS12/01, flight day 163c/2014, Merthyr

Reported by: knpa Owned by: benj
Priority: alpha 4 medium Milestone: 2014 data processing completion
Component: Archiving Keywords:
Cc: dap Other processors: tec

Description (last modified by tec)

Data location: /users/rsg/arsf/arsf_data/2014/flight_data/uk/BGS12_01-2014_163c_Merthyr/

Data arrived from ARSF via network transfer on 13/06/2014

BGS12/01 Scientific objective: unknown

BGS12/01 Priority: 8

PI: Colm Jordan

Sensors:

Camera (22/10/2014), Archvied 13/05/2015
LiDAR (22/10/2014), Archvied 13/05/2015
FW LiDAR (22/10/2014), Archvied 13/05/2015

Change History (28)

comment:1 Changed 10 years ago by knpa

Deleted corrupted webcam image 124333

comment:2 Changed 10 years ago by knpa

  • Description modified (diff)

comment:3 Changed 10 years ago by tec

Started RCD processing.

comment:4 Changed 10 years ago by tec

Started nav processing

comment:5 Changed 10 years ago by tec

BREC Basestation Data
Latitude51 57 10.38483
Longitude-3 22 54.24611
El Height242.211m
CARI Basestation Data
Latitude51 31 51.84544
Longitude-3 06 24.48358
El Height93.119m
Version 1, edited 10 years ago by tec (previous) (next) (diff)

comment:6 Changed 10 years ago by tec

CARI Basestation not used.

Processed the GPS time from 388920.000 till 393600.000
Set the elevation mask to 13.5 degrees to achieve the best possible results with an L2C phase correction of 0.25 cycles.

There is a spike in the latitude seperation which goes above a seperation of 0.1m this spike could affect upto the first 10 seconds of flightline number 8.

comment:7 Changed 10 years ago by tec

Finished Nav processing.

Started RCD processing.

comment:8 Changed 10 years ago by tec

Finished RCD processing

comment:9 Changed 10 years ago by dap

Started delivery checking RCD

comment:10 Changed 10 years ago by dap

RCD delivery check complete. No problems were found.

comment:11 Changed 10 years ago by tec

Starting LiDAR processing.

comment:12 Changed 10 years ago by tec

Having a range gate problem with the LiDAR.

comment:13 Changed 10 years ago by tec

Continuing LiDAR processing.

comment:14 Changed 10 years ago by tec

LiDAR

Flight line Roll Pitch
120614 -0.005809263 -0.000857190
121418 -0.005809263 -0.000857190
122250 -0.005809263 -0.001157190
123045 -0.005609263 -0.000857190
123819 -0.005889263 -0.001157190
124552 -0.005509263 -0.000857190
125347 -0.005709263 -0.000857190
130115 -0.005609263 -0.000857190
131410 -0.005609263 -0.000857190

comment:15 Changed 10 years ago by tec

Ready for DC

comment:16 Changed 10 years ago by dap

Beginning LiDAR Delivery Check

comment:17 Changed 10 years ago by dap

LiDAR Delivery Check

Complete. Found the following minor problems:

  • Weather notes, altitude and speed not present on typed up logsheet
  • PI has not been emailed about vectors yet - ask before data are sent.
  • Both documents in doc/ are named wrong - I've renamed these.
  • sup file does not need to be delivered - I've removed this.
  • incase in "Data details" section is two words.
  • Data quality remarks - be more specific (say which flightline has the hole) and, if you know why it has the hole, say why and what this means. Instead of "There is cloud at the end of most flight lines.", I would write something more detailed like "This dataset was severely affected by cloud coverage. This has been classified as noise (classification 7)."
  • Dan's surname is spelt wrong in the readme, page 11 ("Clewly" should be "Clewley").
  • Discrete ASCII flightlines should have CRLF line terminators
  • Too much foliage has been classified as noise. This will need to be classified to classification 1 before the data are sent. Will then need to re-sort the LAS files using lassort, convert them to ascii and copy the classification over to the las1.3 files.

Dataset will need to be rechecked when the LAS files have been reclassified.

comment:18 Changed 10 years ago by tec

LiDAR
Disregarding stuff about weather notes, logsheet is fine. Data quality says the first flightline has the hole, that is sufficient.

comment:19 Changed 10 years ago by tec

LiDAR
Ready for DC

comment:20 Changed 10 years ago by dap

LiDAR Delivery Check

  • Pre-vector email still needs to be sent to PI - ensure this is done before delivery of data.
  • Typos still existed in read me document with Dan's surname and the word "incase" - I have fixed these.
  • Have also removed knpa from the contact details section in read me (not a problem in first quality check as he was still at PML at this point).
  • las1.0/ was incorrectly named - have renamed this to las1.2.
  • ascii las file line endings needed to be converted to CRLF line terminators - I've done this using unix2dos * in ascii directory.

Full waveform data has not yet been checked - waiting for Windows machine to become free.

comment:21 Changed 10 years ago by dap

LiDAR Delivery Check

laszip completed, created 9 wdz files and 9 laz files, as expected. Will check las 1.3 files in Wave Viewer when Windows machine becomes available.

Last edited 10 years ago by dap (previous) (diff)

comment:22 Changed 10 years ago by dap

LiDAR Delivery Check

Checked files in Wave Viewer. The following records don't have waveforms:

  • File 01: the first ~10,000
  • File 02: the first ~11,000
  • File 04: the first ~50,000
  • File 07: the first ~45,000
  • File 08: the first ~16,000

comment:23 Changed 10 years ago by tec

So the delivery is ok?

comment:24 Changed 10 years ago by dap

LiDAR Delivery Check

Spoken to mark1 regarding the missing waveforms, this is a known issue. Data at
BGS12_01-163c-lidar-20140926 is therefore ready to be delivered.

Last edited 10 years ago by dap (previous) (diff)

comment:25 Changed 10 years ago by dap

Copying LiDAR data and photography to hard drive for delivery.

comment:26 Changed 10 years ago by dap

  • Cc dap added
  • Component changed from Processing: general to Archiving
  • Description modified (diff)
  • Other processors set to tec
  • Owner set to benj

LiDAR data and photography delivered to Dr Colm, 22/10/2014.

comment:27 Changed 9 years ago by tec

Archiving
Starting Archiving

comment:28 Changed 9 years ago by tec

  • Description modified (diff)
  • Resolution set to fixed
  • Status changed from new to closed

Archiving
Done confirmed as of 13/05/2015 12:10

Note: See TracTickets for help on using tickets.