MA14/08, flight day 318/2014, North Selangor Peat Swamp Forest

[dap]

Data location: ~arsf/arsf_data/2014/flight_data/malaysia/MA14_08-2014_318_Selangor

Data arrived from ARSF via network transfer on 05/01/2015.

Scientific objective: to characterise spatially how oil palm cultivation is degrading tropical peatland ecosystem services, using airborne hyperspectral and LiDAR imagery, and supported by an intensive field campaign, in Malaysia’s North Selangor tropical peat swamp forest.

Priority:

PI: Paul Aplin

PI is happy to receive data by USB Hard Disk, network transfer or DVD
Co-I Doreen Boyd requested delivery via USB Hard Drive

OWL data were collected and are present.

Sensors:

• Fenix (requested)
• LiDAR (requested)
• FW LiDAR (requested)

RCD images were requested but could not be collected due to an instrument failure.

[stgo]

Navigation processing

Had to split the basestation file using teqc. Command:
teqc -st 141113232000 -e 141114030000 +nav /tmp/318_output.14n Default_9488_0826_120823.m00 > /tmp/318_output.14o

basestation verification:

Lat	3 07 31.68451
Long	101 33 43.26145
height	18.941

[stgo]

Hyperspectral processing
Found SCTs, waiting on calibration file to finalise processing.

Flightline	FENIX
1	0.96
2	0.95
3	0.93
4	1.04
5	0.93
6	0.95
7	0.79

[stgo]

Lidar Processing

Consistent pitch and roll found with values:

Pitch	-0.00230
Roll	-0.006225
Heading	-0.00008

Classification complete, currently creating delivery.

[stgo]

Lidar processing

Delivery creation complete, ready for DC

[gej]

Started Lidar Delivery Check

[gej]

Lidar Delivery Check

AGC values for FW data not saved (user_data field are 0 for min/max)

Everything else okay.

[stgo]

Lidar Delivery Fix

I've replaced the discrete and full waveform files with updated ones including the AGC value, this should be everything that's needed I think.

Ready for redelivery check

[gej]

Starting ReDelivery Check

[gej]

Lidar Delivery Check

Pitch and Roll values appear incorrect. Were fine before updating to include AGC values.
Not sure what has caused this, as same Pitch and Roll values were used when reprocessing with the AGC saved.

[stgo]

Lidar Processing
Reprocessed with new pitch roll values of:

Pitch	-0.00260
Roll	-0.00626

Files now include AGC value in point ID and user data field.

[gej]

Lidar Delivery check

Read Me
Need to specify N/S in projection.

Renaming
Need to rename LAS1.0 folder to LAS1.2
Rename sol file in navigation

[stgo]

Lidar Delivery

Fixed projection in readme

Renamed sol and las folder

[gej]

Lidar Delivery Check

All looks good now,

Ready for Delivery

[gej]

Lidar Delivered to Paul Aplin via FTP on 30th september 2015