PG14/01, flight day 302b/2014, Kuamut Forest

[dap]

Data location: ~arsf/arsf_data/2014/flight_data/malaysia/PG14_01-2014_302b_Kuamut_Forest

Data arrived from ARSF via network transfer on 06/01/2015.

Scientific objective: Unknown

Priority: Currently unfunded

PI: Glen Reynolds

The size of this dataset is significantly small (only one flightline) as the flight was aborted. The one flightline may not be usable/useful.

There are no RCD images for this flight due to an instrument failure.

Sensors:

• Fenix (?)
• LiDAR (?)
• LiDAR FW (?)

[dap]

While processing 302a's (ticket:554) LiDAR dataset (producing a logsheet), I found that an extra flight line was being added to the logsheet. I searched ~arsf/arsf_data/2014/flight_data/malaysia for this flight line and found it to be part of this flight's LiDAR collection. It was in this flight's log file because we received the two flights from ARSF ops merged in to the same directory.

The solution for the other flight was to back up the original flight line log and remove the extra flight line from the copied log file.

To avoid the same problem in this flight, I have backed up the original flight line log and removed 302a's flightlines from the new one. This is the one that should be used for processing.

[dap]

LiDAR Processing

Starting processing.

[dap]

LiDAR Processing

The sol file from flight 302a was used for this flight as it has sufficient data to be able to process the LiDAR data from this flight.

There is only one flight line for this project. I am processing it using the boresight roll and pitch error values.

[dap]

LiDAR Processing

The flight line has now been processed using ALSPP. Now classifying isolated points (10 points within 5m).

[dap]

LiDAR Processing

Noisy points have now been classified and delivery and have been created. Removed elevation differences section from the read me as there is only one flight line.

[dap]

LiDAR Processing

Ready for delivery check.

[tec]

LiDAR DC
Started

[tec]

LiDAR DC
Add to data quality that FW couldn't be generated. Reclassify LiDAR, theres a bit in the dem that shows its not classified.

Demcompare mean was 11 which is greater than 8, but as its only one line, not sure if anything can be done.

LAS1.0 -> LAS1.2 dir

Once thats done, ill recheck.

[dap]

LiDAR Processing

Thanks for the delivery check. Will have another look at the classifications.

[dap]

LiDAR Processing

I've reclassified the flight line, converted it to ASCII with Windows line endings, regenerated the DEMs and read me (with suggested changes made). I've also renamed las1.0/ to las1.2/

Ready for delivery check.

[tec]

LiDAR DC
Delivery is fine. DC done. Marked as blocked as to my knowledge its unfunded.

[dac]

Delivery

Data delivered to Nathan Renneboog via FTP (arsf11) 29/07/2015