| Version 3 (modified by benj, 13 years ago) (diff) |
|---|
Calibration files
This page hosts calibration files that have been used for processing of ARSF data. Note that these are provided for information only - you should not need to apply these files to your data. ARSF-DAN calibrates data prior to dispatch to users - if you believe that your data may be uncalibrated (ie. the values are not as you expect), see this FAQ. If that does not provide a satisfactory answer, please contact us at arsf-processing@….
Eagle calibration files
- 2012 calibration file (also requires the 2012 calibration header file)
- 2011 calibration file (also requires the 2011 calibration header file)
- 2010 calibration file (also requires the 2010 calibration header file)
- 2009 calibration file (also requires the 2009 calibration header file)
- 2007/8 calibration file (also requires the 2007/8 calibration header file)
- 2006 calibration file (also requires the 2006 calibration header file)
Hawk calibration files
- 2012 calibration file (also requires the 2012 calibration header file)
- 2011 calibration file (also requires the 2011 calibration header file)
- 2010 calibration file (also requires the 2010 calibration header file)
- 2009 calibration file (also requires the 2009 calibration header file)
- 2007/8 calibration file (also requires the 2007/8 calibration header file)
- 2006 calibration file (also requires the 2006 calibration header file)
LiDAR calibration files
RCD calibration files
ATM calibration files
A set of ATM calibration files comprises three files, A, B and C. Which of these is appropriate to use depends on the scan rate with which the data were collected.
- 2007 calibration file A
- 2007 calibration file B
- 2007 calibration file C
- 2006 calibration file A
- 2006 calibration file B
- 2006 calibration file C