Context Navigation

Changes between Version 21 and Version 22 of Help/LeicaLidarDems

v21	v22
101	101	}}}
102	102
103		To extend the coverage of your DEM, if required, it is suggested to patch on external DEM data. If you have access to a good quality DEM then use that, else the SRTM 3 arc second DEM is freely available and covers most of the globe between +-60 degrees latitude. To see how to make a DEM from SRTM data see the [wiki:Processing/SRTMDEMs SRTM DEM] page. Make sure to select the projection the same as your LIDAR DEM.
	103	To extend the coverage of your DEM, if required, it is suggested to patch on external DEM data. If you have access to a good quality DEM then use that, else the SRTM 3 arc second DEM is freely available and covers most of the globe between +-60 degrees latitude. To see how to make a DEM from SRTM data see the [wiki:Processing/SRTMDEMs SRTM DEM] page. Make sure to select the projection the same as your LIDAR DEM. Also, be aware that the SRTM elevations are with respect to a geoid model and will need to be converted to the LIDAR vertical datum.
104	104
105	105	Once you have an SRTM DEM of sufficient coverage you can patch the LIDAR and SRTM DEMs together, such that the LIDAR takes precedence. This means the lidar_dem should be the first of the input maps on the r.patch command. If the mask is still applied then remove it before patching: