ARSF Help Desk

Welcome to the ARSF Data Analysis Node help desk. We are here to help you with any queries you have regarding the processing of your ARSF data. Please spend a few moments to check through these pages to find the answer to your query. If you cannot find the answers you are looking for then please contact us.

Information about data processing prior to delivery

For information on what happens to the data prior to delivery please check this page:

• Data processing procedures

For information on sensors and their specifications please see the sensors page.

Information about data processing after delivery

For information on using ARSF-DAN software or how to get the best from your data please check these pages. For information on using ARSF software please also see the tutorials section:

• Hyperspectral processing
  • Getting started guide to using APL for Eagle/Hawk or Fenix processing.
  • APL processing level 1 to level 3 guide
  • Creating a mosaic from level 3 data
  • Basic information for using azgcorr to process level 1 to level 3 (for older data)

• LiDAR processing
  • ​Creating a DEM from LiDAR Using ARSF DEM scripts (​download scripts)
  • Remove noisy points from delivered LiDAR point cloud files
  • Processing full waveform data
  • Information on LiDAR intensity data

Tutorials

ARSF DAN are in the process of creating some tutorials, with downloadable data, to help users get to know the various software we provide. This is a good place to start if you have no experience with the processing software.

• Tutorials

Frequently Asked Questions

We host a page of Frequently Asked Questions which we try to keep up to date. If you haven't been able to find a solution to your problem so far then this is a good place to check next.

Reports

Reports written by ARSF-DAN on various instrumentation and processing issues can be found here.

Other useful information

• Looking for software downloads?
• Choosing an appropriate Eagle/Hawk or Fenix map pixel size
• Creating a DEM for hyperspectral processing
• Creating a DEM from LiDAR point cloud
• ATM and CASI
  • Converting ATM band 11 to (brightness) temperature
  • Finding out what the wavelengths and bandwidth are (for a specific flight)

• In-house produced scripts and software which may be useful for end users
• Links to external software and tutorials

Contact Us

If you cannot find a suitable answer to your question then please contact us.