Version 7 (modified by knpa, 9 years ago) (diff)

--

Hyperspectral Instrument Leverarm Information

Leverarm calculation

The leverarm gives the 3-dimensional vector from the sensor focal point to the point where the GPS positions are referenced. This is measured using metres in a cartesian coordinate frame where (since 2011): X is positive along tail to nose, Y is positive to starboard, and Z is positive down.

Since 2011 the leverarms for the hyperspectral instruments use the same reference point as the LiDAR does (on a virtual PAV 80). This allows the same navigation data to be used for all the instruments on the aircraft. The leverarms are calculated from measurements made by the survey company (last survey March 2011 by Sterling Surveys).

Note The hyperspectral processing software aznav and aplnav use different coordinate systems for input of the leverarm values. To transform from one set to the other you need to change the signs on the Y and Z components.

Eagle Leverarms

Note that the following are referenced to use the IPAS system (reference point of PAV80) in the aplnav coordinates reference frame. Please refer here for alternative lever arm page.

Year X (metres) Y (metres) Z (metres)
2013 0.39 -0.009 -0.198
2012 0.394 -0.02 -0.143
2011 0.415 -0.014 -0.129

Hawk Leverarms

Note that the following are referenced to use the IPAS system (reference point of PAV80) in the aplnav coordinates reference frame. Please refer here for original leverarms referenced for use with applanix and aznav.

Year X (metres) Y (metres) Z (metres)
2013 0.587 0.006 -0.147
2012 0.581 -0.019 -0.131
2011 0.585 -0.014 -0.129