Changes between Version 50 and Version 51 of Procedures/DeliveryChecking

Timestamp:

Nov 28, 2012, 4:08:35 PM (11 years ago)

Author:

mark1

Comment:

--

Procedures/DeliveryChecking

@@ -33 +33 @@
  1. Check all the LIDAR files open/load, look OK and fit together horizontally and vertically. Either:
    * Use lag to view the data
-   * Use a scripted approach with Grass. Either run import_ldr_txt_to_grass.sh from within Grass or run [wiki:Processing/CreateTifs make_lidardem_or_intensity.sh]. You need to generate these yourself from the ascii files, you can't just look at already created DEM/Screenshots. 
+   * Use a scripted approach with Grass. Either run import_ldr_txt_to_grass.sh from within Grass or run [wiki:Processing/CreateTifs#lidar_intensity.sh lidar_intensity.sh]. You need to generate these yourself from the ascii files, you can't just look at already created DEM/Screenshots. 
  1. Run the script check_ascii_lidar which will read in the ascii files and check all points have the correct number of records (9), report the min/max of the time/easting/northings and the number of points classified as noise.
  1. Look at a couple of lines to check that obvious noise has been classified.