Changes between Version 103 and Version 104 of Procedures/DeliveryChecking


Ignore:
Timestamp:
Oct 21, 2015 12:20:01 PM (4 years ago)
Author:
asm
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Procedures/DeliveryChecking

    v103 v104  
    2727  1. In this case additional information should be added into read me to explain why they are being masked
    2828  1. Check that underflows and overflows tabulated in ReadMe are sensible. Rerun autoQC with different settings or use fastQC if not.
    29   1. '''Check the z profile''' (spectral profile) over some green vegetation and it should look plausible. Check this for each level1 file. [wiki:Procedures/DeliveryChecking/ExampleFenixSpectra See here for example spectra.]
     29  1. '''Check the z profile''' (spectral profile) over some green vegetation and it should look plausible. Check this for each level1 file. You can easily and quickly run [wiki:Procedures/Processing/Py6S_vs_Hyperspectral Py6S for every flightline and check it by following the instructions on the wiki]. Or you can look for some vegetation on FastQC, [wiki:Procedures/DeliveryChecking/ExampleFenixSpectra see here for example spectra.]
    3030 1. Check all of the lev3 mapped files open and look OK (don't need to go through all the bands)
    3131  1. Make sure that all bands have been mapped (not just 3). You can use {{{check_num_bands.py *bil}}} to check the number of bands for all files.