Changes between Version 29 and Version 30 of Procedures/DeliveryChecking

Timestamp:

Jul 26, 2011, 3:48:16 PM (13 years ago)

Author:

knpa

Comment:

--

Procedures/DeliveryChecking

@@ -13 +13 @@
  1. Test out the readme level 3 processing command for one or more of the level 1 files (definitely one per sensor).
  1. Check each of the screenshots
- 1. Run proj_tidy.sh. This will do a variety of tests, which should be checked.
+ 1. Run proj_tidy.sh -c -p <path_to_project>. This will do a variety of tests, which should be checked.
  1. All level 1 files should be looked at visually using fastQC.
  1. Check level 1 files have correct read/write permissions. ` chmod 644 lev1/* `
@@ -36 +36 @@
    * To view the DEM in envi, make a copy of it and run sed -i -e "1d" dem_copy.dem (this removes the azgcorr header)
  1. Check the screenshots look OK
- 1. Run proj_tidy.sh. This will do a variety of tests, which should be checked.
+ 1. Run proj_tidy.sh -c -p <path_to_project>. This will do a variety of tests, which should be checked.
  1. If the delivery is ready to deliver, update the dataset on the [http://arsf-dan.nerc.ac.uk/status/edit/edit.php Processing status page] to "Ready to deliver".
 
@@ -61 +61 @@
  1. View one of the photographs to check it opens OK.
  1. Check file sizes of photographs look reasonable (224M) and there are no _tmp photo files.
- 1. Run proj_tidy.sh. This will do a variety of tests, which should be checked.
+ 1. Run proj_tidy.sh -c -p <path_to_project>. This will do a variety of tests, which should be checked.
  1. Open the kml file in googleearth and check it looks good and that thumbnails are displayed when the push pins are clicked.
   * If thumbnails are not visible open the kml file in a text editor. Check image source is the thumbnails directory and that image filenames are correct.