Changes between Version 50 and Version 51 of Procedures/DeliveryChecking


Ignore:
Timestamp:
Nov 28, 2012 4:08:35 PM (7 years ago)
Author:
mark1
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Procedures/DeliveryChecking

    v50 v51  
    3333 1. Check all the LIDAR files open/load, look OK and fit together horizontally and vertically. Either:
    3434   * Use lag to view the data
    35    * Use a scripted approach with Grass. Either run import_ldr_txt_to_grass.sh from within Grass or run [wiki:Processing/CreateTifs make_lidardem_or_intensity.sh]. You need to generate these yourself from the ascii files, you can't just look at already created DEM/Screenshots.
     35   * Use a scripted approach with Grass. Either run import_ldr_txt_to_grass.sh from within Grass or run [wiki:Processing/CreateTifs#lidar_intensity.sh lidar_intensity.sh]. You need to generate these yourself from the ascii files, you can't just look at already created DEM/Screenshots.
    3636 1. Run the script check_ascii_lidar which will read in the ascii files and check all points have the correct number of records (9), report the min/max of the time/easting/northings and the number of points classified as noise.
    3737 1. Look at a couple of lines to check that obvious noise has been classified.