Changes between Version 55 and Version 56 of Procedures/DeliveryChecking

Timestamp:

Aug 16, 2013, 1:00:08 PM (11 years ago)

Author:

mark1

Comment:

--

Procedures/DeliveryChecking

@@ -21 +21 @@
  1. Check a selection of the lev3 mapped files open and look OK (don't need to go through all the bands)
   1. Make sure that all bands have been mapped (not just 3)
+ 1. Check the projection used is correct - especially the correct UTM zone for the data
  1. If the delivery is ready to deliver, update the dataset on the [http://arsf-dan.nerc.ac.uk/status/edit/edit.php Processing status page] to "Ready to deliver".
  1. If everything is ready to deliver, i.e. no more changing of ReadMe files, then in the sensor delivery directory run the script: zip_mapped.sh. This process should zip all of the mapped lines in the flightlines/mapped directory. Check the output.
@@ -40 +41 @@
    * Check DEM in envi
    * check DEM header resolution is the same as in the Read_Me file - trim the hdr resolution if in metres and seems sensible to (e.g. 2.000124342 metres should be 2.0)
+ 1. Check the projection used is correct - especially the correct UTM zone for the data
  1. Check the screenshots look OK 
  1. Run proj_tidy.sh -c -p <path_to_project>. This will do a variety of tests, which should be checked.