Changes between Version 66 and Version 67 of Procedures/DeliveryChecking

Timestamp:

Aug 12, 2014, 9:28:27 AM (10 years ago)

Author:

stgo

Comment:

--

Procedures/DeliveryChecking

@@ -42 +42 @@
    * Check DEM in envi
    * check DEM header resolution is the same as in the Read_Me file - trim the hdr resolution if in metres and seems sensible to (e.g. 2.000124342 metres should be 2.0)
-   * Use demcompare.py to test differences between the lidar and dem data run either:
-   * demcompare.py -c path/to/lidar.dem -d path/to/hyperspectral.dem --lidar /path/to/asciifolder
-   * demcompare.py -c path/to/lidar.dem -n path/to/navfile -p projectdir --lidar /path/to/asciidir
  1. Check the projection used is correct - especially the correct UTM zone for the data
  1. Check that the coverage of the DEM is sufficient for processing the hyperspectral data.