Changes between Version 86 and Version 87 of Procedures/DeliveryChecking

Timestamp:

Nov 25, 2014, 12:07:15 PM (9 years ago)

Author:

lah

Comment:

Added step to check automatically generated underflows and overflows

Procedures/DeliveryChecking

@@ -24 +24 @@
   1. If any pixels appear to be constantly bad (c.f. 2009? dust on lens problems) then return to processor for re-processing calibration using a list of additional bad pixels to mask (see aplcal -qcfailures)
   1. In this case additional information should be added into read me to explain why they are being masked
+  1. Check that underflows and overflows tabulated in ReadMe are sensible. Rerun autoQC with different settings or use fastQC if not.
  1. Check all of the lev3 mapped files open and look OK (don't need to go through all the bands)
   1. Make sure that all bands have been mapped (not just 3). You can use {{{check_num_bands.py *bil}}} to check the number of bands for all files.