Changes between Version 11 and Version 12 of Procedures/EagleHawkProcessing

Timestamp:

Oct 14, 2010, 2:32:03 PM (14 years ago)

Author:

knpa

Comment:

--

Procedures/EagleHawkProcessing

@@ -42 +42 @@
 By default this will do timing runs for each line on the gridengine using SCT offsets between -0.1 and 0.1.
 
-This will run without a DEM by default, since none has been created yet. To run with a DEM, first create the DEM - if it's in the UK you can use [wiki:Processing/NextMapDEMs Nextmap data] (try running `nextmapdem.sh` in the project directory to do it automatically, otherwise see the [wiki:Processing/NextMapDEMs wiki page]).  If it's non-UK, you'll need to use [wiki:Help/LeicaLidarDems LiDAR data] (you may wish to use this anyway if it's available - see [wiki:Processing/CreateTifs here] on how to do this using a script), or failing that [wiki:Processing/SRTMDEMs SRTM 90m data]. Copy it into the dem directory. Once you've done this include the DEM file in the config file by entering "dem=<dem_file_name>" under the DEFAULT section.
+To return sensible results you will need a dem. One should have already been completed in the unpacking stage, if not, it will need to be created. If it's in the UK you can use [wiki:Processing/NextMapDEMs Nextmap data] (try running `nextmapdem.sh` in the project directory to do it automatically, otherwise see the [wiki:Processing/NextMapDEMs wiki page]).  If it's non-UK, you'll need to use [wiki:Help/LeicaLidarDems LiDAR data] (you may wish to use this anyway if it's available - see [wiki:Processing/CreateTifs here] on how to do this using a script), or failing that [wiki:Processing/SRTMDEMs SRTM 90m data]. Copy it into the dem directory. Once you've done this include the DEM file in the config file by entering "dem=<dem_file_name>" under the DEFAULT section.
 
 Check against OS vectors.