Changes between Version 11 and Version 12 of Procedures/EndUserDelivery/HardDisk


Ignore:
Timestamp:
Aug 3, 2011 10:26:54 AM (8 years ago)
Author:
knpa
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Procedures/EndUserDelivery/HardDisk

    v11 v12  
    33== First steps ==
    44
    5 Plug in the external hard drive.
     5 1. Plug in the external hard drive.
     6 1. You will need to have root permissions before you start: `sudo su` and then type in your linux password.
     7 1. Run dmesg to find device name. Listed at the bottom if just plugged in.
    68
    7 You will need to have root permissions before you start ('sudo su' and then type in your password).
    8 
    9 Run dmesg to find device name. Listed at the bottom if just plugged in.
    10 
    11 e.g
    12 
    13 {{{
    14 SSELinux: initialized (dev sdb, type fuseblk), uses genfs_contexts
    15 }}}
    16 
    17 or
     9e.g.
    1810
    1911{{{
     
    2315Device path is then /dev/sdb (not sdb1 etc, this indicates a partition on sdb)
    2416
    25 Run mount to find the name of the partition you need to unmount e.g /dev/sdb1
     17 4. Run mount to find the name of the partition you need to unmount e.g /dev/sdb1.
     18 5. Unmount the partition with umount /dev/partition, e.g. umount /dev/sdb1 (if not already unmounted)
    2619
    27 Unmount the partition with umount /dev/partition, e.g. umount /dev/sdb1 (if not already unmounted)[[BR]]
    28 
    29 At this point you will need to make a Windows format disk (NTFS, not FAT32) for all data types.
    30 
    31 note: for hyperspectral data prior to 2011, make a Linux format disk (ext3)
    32 
    33 ---------------------
    3420== Formatting and partitioning ==
    3521