Changes between Version 66 and Version 67 of Procedures/EndUserDelivery

Timestamp:

Aug 13, 2009, 12:46:51 PM (15 years ago)

Author:

knpa

Comment:

--

Procedures/EndUserDelivery

@@ -137 +137 @@
 Unmount disk (with umount [device path]) Run dmesg to find device name (listed at the bottom if just plugged in)
 
-run fdisk /dev/device name (probably sdb)
+Run fdisk /dev/device name (probably sdb)
 
 enter 'p' to print partition table and check you have selected the correct disk[[BR]]
@@ -147 +147 @@
 To format the disk:[[BR]]
 
-ensure disk is unmounted again
-
-to be on the safe side, run dmesg again to make sure device name hasn't changed
-
-
-run mke2fs -j /dev/partition (probably sdb1)
+Ensure disk is unmounted again
+
+To be on the safe side, run dmesg again to make sure device name hasn't changed
+
+
+Run mke2fs -j /dev/partition (probably sdb1)
 
 Change permissions:[[BR]]
 
-make writable for everyone – chmod a+rwx /media/disk (disk needs to be mounted again first, if you have trouble then unplug then plug back in again).
+Make writable for everyone – chmod a+rwx /media/disk (disk needs to be mounted again first, if you have trouble then unplug then plug back in again).
+
+
+[[BR]]
+[[BR]]
+=== Copy over your data onto the disk ===
+[[BR]]
+[[BR]]
+
 
 === Finalising hard disk ===