Data arrival by network transfer

Looking for data on Thelma

1. change to arsf user on a safe machine

   ssh arsf@gridmaster2 # (or su - arsf and don't turn your machine off!)
   

2. find the exact data path on Ops server

   ssh arsfdan@thelma.nerc-arsf.ac.uk
    # go find the path to the data to download
    # these will vary..
   cd /data/Data_2009/
   cd UK
   cd 281-09_GB08-02_Delamere
    # check path
   pwd
    # returns /data/Data_2009/UK/281-09_GB08-02_Delamere
    #
    # check size isn't crazy big
    # > 150GB and think about a disk transfer
   du -hsc .
    # if you get any permission denied errors, fix up permissions then redo the du.
    # fix permissions with:
    # /data/permissions_fixer/fix_perms_for_arsfdan.sh DIRECTORY_NEEDING_FIX
    #  **be very careful** with this as you could easily screw up the whole thelma server if you get the directory wrong!
   logout
   

Looking for data on the disk station

1. change to arsf user on a safe machine

   ssh arsf@gridmaster2 # (or su - arsf and don't turn your machine off!)
   

2. find the exact data path on Ops server

   ssh arsfdan@thelma.nerc-arsf.ac.uk
    # go find the path to the data to download
    # these will vary..
   cd /mnt/synology1/ or /mnt/synology2
   cd data/Data\ 2014/ or maybe Data/Data\ 2014/ or similar
   cd 281-09_GB08-02_Delamere
    # check path
   pwd
    # returns /mnt/synology1/data/Data 2014/UK/281-09_GB08-02_Delamere
    #
    # check size isn't crazy big
    # > 150GB and think about a disk transfer
   du -hsc .
    # if you get any permission denied errors, fix up permissions then redo the du.
    # Not sure how for the disk station
   logout
   

Getting the data

1. create a temporary directory in ~arsf_data/YYYY/flight_data/unpacking/ to download to, e.g.

   DOWNDIR=~/arsf_data/`date +%Y`/flight_data/unpacking/download-`date +%Y%m%d%H%M%S`
   mkdir $DOWNDIR
   cd $DOWNDIR
   

2. do the download with rsync, using compression (-z flag). Note there is no trailing / on the PROJECTNAME part of the path below - this is important!
   • example rsync command follows, with a --dry-run option to prevent any damage occurring on the trial attempt. If it lists the files you'd expect it to transfer, remove the --dry-run option and repeat. If not, check your slashes!

     date
     rsync --dry-run -avz arsfdan@thelma.nerc-arsf.ac.uk:/PATH/YOU/FOUND/EARLIER/PROJECTNAME . ; date
      # date commands are optional, they just let you see when it started and stopped
     

If something goes wrong after an hour or two, don't delete what you've already downloaded. Instead, repeat the rsync command and it'll pick up where it left off.

Spaces

Spaces in the path name need double escaping in rsync, eg. arsfdan@…:/mnt/synology1/Data/Data
\ 2014/216-14_GB14-00_Riss_Cal_Hyperspectral

Unpacking data

Return to Procedures/NewDataArrival