Changes between Version 38 and Version 39 of Procedures/ProcessingChainInstructions/NavigationProcessing


Ignore:
Timestamp:
Jun 28, 2017 12:07:00 PM (22 months ago)
Author:
dac
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Procedures/ProcessingChainInstructions/NavigationProcessing

    v38 v39  
    11= Navigation Processing =
    22
    3 The first step of processing a project is to do the navigation. This uses the IPAS TC software.
     3The first step of processing a project is to do process the GPS and Inertial Measurement Unit (IMU) data. This uses the IPAS TC software.
    44
    55If '''using a base station''' then you '''must first verify it's location''':
     
    88 1. [wiki:Processing/IPASTC IPASTC Processing]
    99
    10 If IPAS TC does not give good enough results then we can use IPAS Pro + GrafNav to try and get an improved result. See [wiki:Processing/IPASTC#AnalysingtheData] for what is meant by "good enough".
     10If IPAS TC does not give sufficiently high accuracy then we can use IPAS Pro + GrafNav to try and get an improved result. See [wiki:Processing/IPASTC#AnalysingtheData] for what is meant by "sufficiently high accuracy".
    1111
    1212 * [wiki:Processing/IPASPro IPASPro Processing]
     
    1616=== Base station issues ===
    1717
    18 For information on how to convert the Leica ARSF basestation to RINEX data see '''[wiki:Processing/RawToRinex here]''
     18For information on how to convert the NERC-ARF Leica basestation to RINEX data see '''[wiki:Processing/RawToRinex here]''
    1919
    2020If there are no basestation data with the project then check '''[wiki:Processing/GNSSStatinons here]''' for possible places to download from.