Changes between Version 29 and Version 30 of Procedures/ProcessingChainInstructions/NavigationProcessing

Timestamp:

May 24, 2013, 10:04:43 AM (11 years ago)

Author:

mark1

Comment:

--

Procedures/ProcessingChainInstructions/NavigationProcessing

@@ -1 +1 @@
 = Navigation Processing =
 
-The first step of processing a project is to do the navigation.
+The first step of processing a project is to do the navigation. This uses the IPAS TC software.
 
 If '''using a base station''' then you '''must first verify it's location''':
 
- * '''[wiki:Processing/BasestationVerification Base station position verification]'''
+ 1. '''[wiki:Processing/BasestationVerification Base station position verification]'''
+ 1. [wiki:Processing/IPASTC IPASTC Processing]
 
-If you need to process navigation data for the ALS-II Lidar/RCD (IPAS) then follow one of these links:
+If IPAS TC does not give good enough results then we can use IPAS Pro + GrafNav to try and get an improved result
 
  * [wiki:Processing/IPASPro IPASPro Processing]
- * [wiki:Processing/IPASTC IPASTC Processing]
 
 For data collected in 2012 we can use the .sol files generated above directly in the hyperspectral processing software.
@@ -16 +16 @@
 === Base station issues ===
 
-If there are no basestation data with the project then check [wiki:Processing/GNSSStatinons here] for possible places to download from.
+If there are no basestation data with the project then check '''[wiki:Processing/GNSSStatinons here]''' for possible places to download from.
 
-If you find you need to do a Network Adjustment then look [wiki:Processing/NetworkAdjustment here] for instructions how.
+If you find you need to do a Network Adjustment then look '''[wiki:Processing/NetworkAdjustment here]''' for instructions how.
 
-For limited information on converting base station formats check this [wiki:Processing/RawToRinex page].
+For limited information on converting base station formats check this '''[wiki:Processing/RawToRinex page]'''.