Changes between Version 38 and Version 39 of Procedures/ProcessingChainInstructions/NavigationProcessing

Timestamp:

Jun 28, 2017, 12:07:00 PM (7 years ago)

Author:

dac

Comment:

--

Procedures/ProcessingChainInstructions/NavigationProcessing

@@ -1 +1 @@
 = Navigation Processing =
 
-The first step of processing a project is to do the navigation. This uses the IPAS TC software.
+The first step of processing a project is to do process the GPS and Inertial Measurement Unit (IMU) data. This uses the IPAS TC software.
 
 If '''using a base station''' then you '''must first verify it's location''':
@@ -8 +8 @@
  1. [wiki:Processing/IPASTC IPASTC Processing]
 
-If IPAS TC does not give good enough results then we can use IPAS Pro + GrafNav to try and get an improved result. See [wiki:Processing/IPASTC#AnalysingtheData] for what is meant by "good enough".
+If IPAS TC does not give sufficiently high accuracy then we can use IPAS Pro + GrafNav to try and get an improved result. See [wiki:Processing/IPASTC#AnalysingtheData] for what is meant by "sufficiently high accuracy".
 
  * [wiki:Processing/IPASPro IPASPro Processing]
@@ -16 +16 @@
 === Base station issues ===
 
-For information on how to convert the Leica ARSF basestation to RINEX data see '''[wiki:Processing/RawToRinex here]''
+For information on how to convert the NERC-ARF Leica basestation to RINEX data see '''[wiki:Processing/RawToRinex here]''
 
 If there are no basestation data with the project then check '''[wiki:Processing/GNSSStatinons here]''' for possible places to download from.