Changes between Version 45 and Version 46 of Procedures/RCDPhotoProcessing

Timestamp:

Feb 2, 2011, 10:29:05 AM (13 years ago)

Author:

mark1

Comment:

--

Procedures/RCDPhotoProcessing

@@ -23 +23 @@
 1. Process the IPAS data and create a SOL file - Make sure to use the RCD camera lever arms not the LiDAR lever arms (and name the sol file appropriately so as not to get confused).
  1. Create a KML file and view it in Google Earth.
-  * Check the rcd/logs file for an ***!ImageEvents1.csv file. There may be some empty files with this name so be sure to choose the correct one. If there are more then one then you need to specify which one to use. Run `kmlise_project.py -d <main_project_dir> -e main_project_dir/rcd/logs/***!ImageEvents1.csv > kml_file.kml` - this create a kml file using the !ImageEvents1.csv file
+  * Check the rcd/logs file for an ***!ImageEvents1.csv file. There may be some empty files with this name so be sure to choose the correct one. If there are more then one then you need to specify which one to use. Run `generateKMLforPI.py -d <main_project_dir> -e main_project_dir/rcd/logs/***!ImageEvents1.csv -o kml_file.kml` - this create a kml file using the !ImageEvents1.csv file
   * Open the kml file in google earth
   * Note which blocks of photographs do not overlap with any Eagle/Hawk data. Usually consists of a group of photographs at the start of the survey where they set up the exposure rates etc for the camera. Often the log sheet notes which images too.