Changes between Version 28 and Version 29 of Procedures/RCDPhotoProcessing

Timestamp:

Jul 2, 2010, 2:50:23 PM (14 years ago)

Author:

emca

Comment:

--

Procedures/RCDPhotoProcessing

@@ -3 +3 @@
 The RCD produces raw files that need to be processed in order to create TIFF files.  The processing basically uses a gain and offset scaling and (probably) corrects for lens distortion.  See the [wiki:Sensors/RCD_CH39 RCD page] for more details, including filename convention.
 
+Note this is currently not working under wine so all photo processing needs to be done on the windows box.
+
 = Processing the raws =
+
 
  1. Load the Leica photo processing software
     * Under Windows, select start->programs->leica->calibration->Calibration Post Processing
-    * If using wine, run "leica_photo_processing"
+    * If using wine, run "leica_photo_processing" - 
  1. Select the appropriate camera config (Parameters)
     * As of late 2009, this is CH39_021_060
     * There may be updates to this as the camera is recalibrated
  1. Select the input files
-    * Typically this will be something like ~airborne/workspace/IPY09_11-2009_219_Helheim/leica/RCD/images
+    * Typically this will be something like ~airborne/workspace/IPY09_11-2009_219_Helheim/leica/rcd/images
     * You can click and shift-click to select a list from the open file dialog, but be aware that it appears to take about 5 seconds per file under wine, so expect a long wait while it's thinking (it hasn't crashed!)
  1. Ensure both Auto Contrast and Adaptive Left-Right Balance are selected. 
  1. Select the output directory
-    * Typically this will be something like ~airborne/workspace/IPY09_11-2009_219_Helheim/leica/RCD/images-processed
+    * Typically this will be something like ~airborne/workspace/IPY09_11-2009_219_Helheim/leica/rcd/proc_images
  1. Select 16 bit TIFF output ('''this is important! ''')
  1. Hit the start button and go for coffee (allow about 20-30secs per file)