Changes between Version 53 and Version 54 of Procedures/RCDPhotoProcessing

Timestamp:

Mar 3, 2011, 2:50:35 PM (14 years ago)

Author:

knpa

Comment:

--

Procedures/RCDPhotoProcessing

@@ -24 +24 @@
  
  1. Create a KML file and view it in Google Earth. Check the rcd/logs file for an ***!ImageEvents1.csv. There may be some empty files with this name so be sure to choose the correct one. If there are more then one then you need to specify which one to use.
-  * Run `kmlise_project.py -d <main_project_dir> -e ***ImageEvents1.csv > kml_file.kml` - this creates a kml file using the !ImageEvents1-processed.csv file
+  * Run `kmlise_project.py -d <main_project_dir> -e ***ImageEvents1.csv > kml_file.kml` - this creates a kml file using the !ImageEvents1-processed.csv file **NOTE- this program currently falls over unless the eagle directory is clear of unrecognised files**
   * Open the kml file in google earth
   * Note which blocks of photographs do not overlap with any Eagle/Hawk data. Usually consists of a group of photographs at the start of the survey where they set up the exposure rates etc for the camera. Often the log sheet notes which images too.