Changes between Version 5 and Version 6 of Processing/GrafNavProcessing


Ignore:
Timestamp:
Apr 30, 2009, 11:10:05 AM (15 years ago)
Author:
mark1
Comment:

--

Legend:

Unmodified
Added
Removed
Modified

  • Processing/GrafNavProcessing

    v5 v6  
    1 == GrafNav GNSS Processing for IPAS Pro ==
     1== Grafnav GNSS Processing for IPAS Pro ==
    22
    33Similar to Applanix GNSS processing. (See that wiki page if these notes dont make sense :))
    … …  
    1919
    2020If the PPP processing method doesn't work and gives the error "Cannot find epoch ... blah blah blah", then try this:
    21  1. Go to "Help" and "About GrafNav"
     21 1. Go to "Help" and "About Grafnav"
    2222 1. Click download manufacturer files
    2323 1. Re-try running the PPP
    2424
    25 === Exporting GrafNav Result to POSPAC ===
    26 It is possible to do the GNSS processing in GrafNav and then export the result into POSPAC. This saves doing the GNSS processing two times (one for LiDAR IMU and one for Applanix IMU). The version of GrafNav is newer than the POSGNSS version and should be used instead of POSGNSS.
     25=== Exporting Grafnav Result to POSPAC ===
     26It is possible to do the GNSS processing in Grafnav and then export the result into POSPAC. This saves doing the GNSS processing two times (one for LiDAR IMU and one for Applanix IMU). The version of Grafnav is newer than the POSGNSS version and should be used instead of POSGNSS.
    2727
    28 When the solution in GrafNav is ready to be exported, save the project and go into POSGNSS. Open the GrafNav project into POSGNSS, ignore warnings about being an older version. Then click the "combine GNSS" or "combine PPP" button. This will load in the previous solution. This can then be exported to POSProc as per usual.  If the "combine" buttons are not highlighted, then you can goto the menu and select combine solutions, select the files and load in the forward and reverse ones.
     28When the solution in Grafnav is ready to be exported, save the project and go into POSGNSS. Open the Grafnav project into POSGNSS, ignore warnings about being an older version. Then click the "combine GNSS" or "combine PPP" button. This will load in the previous solution. This can then be exported to POSProc as per usual.  If the "combine" buttons are not highlighted, then you can goto the menu and select combine solutions, select the files and load in the forward and reverse ones.