Changes between Version 14 and Version 15 of Processing/LeicaProcedure

Timestamp:

May 19, 2010, 12:52:46 PM (14 years ago)

Author:

knpa

Comment:

--

Processing/LeicaProcedure

@@ -20 +20 @@
 === Data QC and further processing ===
 
-The final stages of the processing are to quality check the data and filter out noisy points. To do this we use the Terrasolid package within the Microstation CAD environment, and can be very time consuming.  See [wiki:Processing/TerrascanTips tips] on using Terrascan and also the QC section [wiki:Sensors/LeicaLIDAR/MashUp#QC here] for details on the process.
+[wiki:Processing/Lidarqcprocedure Full QC procedure].
+
+The final stages of the processing are to quality check the data and filter out noisy points. To do this we use the Terrasolid package within the Microstation CAD environment, and can be very time consuming.  See [wiki:Processing/TerrascanTips tips] on using Terrascan and also the QC section [wiki:Sensors/LeicaLIDAR/MashUp#QC here] for further notes from leica.
 
 The main steps will be:
@@ -29 +31 @@
  * if GCPs available then compare them against LIDAR
 
-Further information on the data QC routines can be found [wiki:Processing/Lidarqcprocedure here]
 ----------------
 == Calibration Files ==