| | 1 | =LiDAR Calibration Notes - Software issues and Common mistakes= |
| | 2 | |
| | 3 | =Attune= |
| | 4 | * AutoBoreSight.exe error -"Boresight programme could not be found" |
| | 5 | * Resolution: Check projection is correct (UTM or OSGB) |
| | 6 | * Note: sometimes this doesn't fully resolve the issue, in which case currently no solution has been found. |
| | 7 | |
| | 8 | =lasground= |
| | 9 | * Failing on a section of line |
| | 10 | * Resolution: Use a different line or manually classify that line. |
| | 11 | |
| | 12 | =lascontrol= |
| | 13 | * Check that the command is correct inc parse using 's' for blank columns e.g. -parse sxyz for 4 columns |
| | 14 | |
| | 15 | =ALSPP= |
| | 16 | * RangeCardCal Error |
| | 17 | * Resolution: File missing from "Sent to" (C:\Documents and Settings\*user*\SendTo) folder. |
| | 18 | * Alternatively use a different user's account that this has been done. |
| | 19 | |
| | 20 | * Pulse Rate error when loading in raw LiDAR data - Doesn't appear to change the result, no solution |
| | 21 | |
| | 22 | |
| | 23 | We are investigating the issues regarding to the software errors and have contacted the manufacturer |