Changes between Version 27 and Version 28 of Processing/LidarCalibrationProcedure

Timestamp:

Aug 17, 2012, 10:59:35 AM (12 years ago)

Author:

emca

Comment:

--

Processing/LidarCalibrationProcedure

@@ -25 +25 @@
  * Process raw scan to attune files in ALS Post Processor
  * Use Attune to calculate boresight parameters
- * Analyse in Terrascan - reprocess if necessary
+ * Analyse in LAG - reprocess if necessary
 
 1. Process the Navigation as per usual using IPAS Pro and Grafnav
@@ -45 +45 @@
    * Part of interest will be the area where all flight lines overlap.
 
-3. Converting the ATN.LAS files to bin files. Ground classification needs to be performed on the files before tie pointing in Attune. But to load the ATN.LAS files into Terrascan we need to first import them into Attune to convert them. To do this we need to start the Attune software
+3. Converting the ATN.LAS files to bin files. Ground classification needs to be performed on the files before tie pointing in Attune. To do this we need to first import the ATN.LAS files into Attune to convert them to .bin files. To do this we need to start the Attune software
  * We do this so that we only use points on the ground in the tie pointing (since we don't want errors due to perspective or shadowing)
  * In Attune - Add ALS data -> add the real ATN.LAS files from the ALSPP output